GB/T 38341-2019Micro-electromechanical system technology—The reliability test methods of MEMS in integrated environments (English PDF)
微机电系统(MEMS)技术 MEMS器件的可靠性综合环境试验方法
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38341-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2019
Implementation date
April 1, 2020
Scope
GB/T 38341-2019 is the English-translated version of 微机电系统(MEMS)技术 MEMS器件的可靠性综合环境试验方法.
GB/T 38341-2019 is the Chinese standard "Micro-electromechanical system technology—The reliability test methods of MEMS in integrated environments". Its scope clause reads: This standard specifies the test method and failure result treatment for the comprehensive environment of MEMS device reliability.
This standard applies to MEMS devices that require reliability testing. Its clauses include terms and definitions; test method.
Found what you need?
Document preview — GB/T 38341-2019
National Standard of the People's Republic of China
- ICS
- 31.200
- Classification
- L 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword III
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Test method
- 4.1 Pretreatment
- 4.2 Temperature and humidity test
- 4.3 Mechanical test
- 4.4 Coupling test
- 5 Failure result processing
1 Scope
This standard specifies the test method and failure result treatment for the comprehensive environment of MEMS device reliability.
This standard applies to MEMS devices that require reliability testing.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 26111 Micro-Electro-Mechanical System (MEMS) technical terms
3 terms and definitions
The terms and definitions defined in GB/T 26111 apply to this document.
4 Test method
4.1 pre-processing
4.1.1 Overview
The device should be pre-treated before the test. If the device does not require soldering during use or the user believes that soldering will not affect the device
Response, no preprocessing is required.
4.1.2 Purpose
This test simulates the effects of various environments experienced by the device during welding due to welding. Due to temperature and humidity during the welding process
The degree of influence may cause thermal mismatch stress, large strain caused by water vapor evaporation, and failure of organic pollution. So there is welding
The required devices shall be subjected to this test.
4.1.3 Equipment
The test equipment includes a temperature-controlled test chamber that can be thermostated at a specified temperature, and a soaking device that can work at a specified temperature and humidity
Equipment, and a reflow equipment capable of reaching the specified temperature.
4.1.4 Procedure
4.1.4.1 Maintenance and initial treatment of the test chamber
Prior to the start of the test timing, the temperature test box should retain sufficient heating time to ensure that the temperature of all samples to be measured is as uniform as possible;
The equipment shall retain sufficient temperature and humidity control time, and all the devices under test shall reach the specified temperature and humidity.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38341-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38341-2019
$295.00