GB/T 38339-2019Determination of phosphorus content in fluorescent brightener products (English PDF)
荧光增白剂产品中磷含量的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38339-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2019
Implementation date
November 1, 2020
Scope
GB/T 38339-2019 is the English-translated version of 荧光增白剂产品中磷含量的测定.
GB/T 38339-2019 is the Chinese standard "Determination of phosphorus content in fluorescent brightener products". Its scope clause reads: This standard specifies the phosphorus molybdenum blue method and phosphorus molybdenum yellow method for the determination of phosphorus content in fluorescent brightener products.
This standard applies to the determination of phosphorus content in fluorescent brightener products. Phosphorus molybdenum yellow method is only applicable to the determination of phosphorous content above 500mg/kg in fluorescent brightener products. Its clauses include principle; reagents or materials.
Found what you need?
Document preview — GB/T 38339-2019
National Standard of the People's Republic of China
- ICS
- 71.100.01
- Classification
- G 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 Reagents or materials
1 Scope
This standard specifies the phosphorus molybdenum blue method and phosphorus molybdenum yellow method for the determination of phosphorus content in fluorescent brightener products.
This standard applies to the determination of phosphorus content in fluorescent brightener products.
Phosphorus molybdenum yellow method is only applicable to the determination of phosphorous content above 500mg/kg in fluorescent brightener products.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 6682-2008 Analytical laboratory water specifications and test methods
3 Principle
The sample is decomposed to decompose organic matter, and the phosphorus is completely converted into orthophosphate. Under acidic conditions, the orthophosphate and ammonium molybdate generate heterogeneity.
acid. In the presence of antimony or bismuth, reduction with ascorbic acid to phosphorus antimony (bismuth) molybdenum blue; or in the presence of vanadium, formation of a stable yellow vanadium molybdenum phosphate
[(NH4) 3PO4NH4VO3 · 16MoO3]. It conforms to Beer's law in a certain concentration range.
4 Reagents or materials
Laboratory water should meet the requirements of Grade III water in GB/T 6682-2008. The reagents used in this standard are
Analysis of pure.
4.1
Nitric acid.
4.2
Perchloric acid.
4.3 Mixed acid
The volume ratio of perchloric acid to nitric acid is 1. 3.
4.4
Hydrochloric acid.
4.5
Hydrogen peroxide.
4.6 Sulfuric acid solution
The volume ratio of sulfuric acid to water is 1. 1.
4.7 Ammonium molybdate solution
Dissolve 13g of ammonium molybdate [(NH4) 6Mo7O24 · 4H2O] in 100mL of water and dissolve 0.35g of potassium antimony tartrate
[KSbC4H4O2 · 1/2H2O] in 100 mL of water. Add ammonium molybdate solution to 300mL sulfuric acid solution under continuous stirring (4.6), then slowly add the antimony potassium tartrate solution and mix well.
4.8 Ammonium vanadyl molybdate coloration solution
Weigh 1.25g of ammonium metavanadate [H4NO3V], add.200mL of water to heat and dissolve, add 250mL after cooling
Nitric acid. Also weigh 25g of ammonium molybdate, add 400mL of water to heat and dissolve, and under cooling conditions, mix the two solutions and make up to volume
1000mL. Keep away from light and cannot be used if precipitation occurs.
4.9 Ascorbic acid solution (100g/L)
Dissolve 10g ascorbic acid (C6H8O6) in 100mL water.
4.10 Phosphorus standard stock solution (50mg/L)
Accurately weigh 0.2197g (accurate to 0.0002g) and dry it at 110 °C for 2h and dry it in a desiccator
After cooling for 30 min, potassium dihydrogen phosphate was dissolved in water and transferred to a 1000 mL volumetric flask.Add about 800 mL of water and 3 mL of nitrate.
Acid, dilute with water to the mark and shake well. 1.00mL of this standard solution contains 50.0µg of phosphorus. It is also available in certified standard solutions.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38339-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38339-2019
$85.00