GB/T 38296-2019Internal connecting wires and cables of electrical equipments (English PDF)
电器设备内部连接线缆
This is a limited preview
Buy now to download the full PDF (38 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38296-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 10, 2019
Implementation date
July 1, 2020
Scope
GB/T 38296-2019 is the English-translated version of 电器设备内部连接线缆.
GB/T 38296-2019 is the Chinese standard "Internal connecting wires and cables of electrical equipments". Its scope clause reads: This standard specifies the type, name and representation method, structural requirements, signs, and finished cable tests of the internally connected wires and cables of electrical equipment.
Requirements, test methods, and technical requirements for various types of internally connected wires and cables.
This standard applies to the nominal cross-sectional area of the conductor 0.051mm2 ~ 25mm2, AC rated voltage 30V, 60V, 90V, 125V, 150V, 300V, 600V and other wires and cables (hereinafter referred to as cables), used for household and similar purposes equipment, information technology equipment, audio and video equipment Equipment and telecommunications terminal equipment and other electrical equipment.
Found what you need?
Document preview — GB/T 38296-2019
National Standard of the People's Republic of China
- ICS
- 29.060.20
- Classification
- K 13
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword I
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Product model, product name and product representation method
- 5 General requirements for cable structure
- 6 signs
- 7 Finished cable test
- 8 Thermoplastic insulated extruded single core unsheathed cable
- 9 Thermoplastic insulated thermoplastic sheathed extruded cable
- 10 Thermoset insulated extruded single core unsheathed cable
- 11 Thermosetting insulated thermoset sheathed extruded cable
- 12 Non-extruded insulated high temperature cable
- 13 Extrusion Insulated Unsheathed Flat Ribbon Cable
- Appendix A (Normative Appendix) Conductors for internal connection cables of electrical equipment
- Appendix B (Normative appendix) Insulation and sheath materials for internal connection cables of electrical equipment
- Appendix C (Normative Appendix) Test methods for internal connection cables of electrical equipment
- References
1 Scope
This standard specifies the type, name and representation method, structural requirements, signs, and finished cable tests of the internally connected wires and cables of electrical equipment.
Requirements, test methods, and technical requirements for various types of internally connected wires and cables.
This standard applies to the nominal cross-sectional area of the conductor 0.051mm2 ~ 25mm2, AC rated voltage 30V, 60V, 90V, 125V,
150V, 300V, 600V and other wires and cables (hereinafter referred to as cables), used for household and similar purposes equipment, information technology equipment, audio and video equipment
Equipment and telecommunications terminal equipment and other electrical equipment.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 2900.10 Electrical terminology cable
GB/T 2951.11-2008 Common test methods for insulating and sheathing materials of electric and optical cables. Part 11. General test methods
Physical and physical properties test of thickness and shape measurement
GB/T 2951.12-2008 General test methods for insulating and sheathing materials of electric and optical cables. Part 12. General test methods
Thermal aging test method
GB/T 2951.14-2008 General test methods for insulating and sheathing materials of electric and optical cables. Part 14. General test methods
Low temperature test
GB/T 2951.21-2008 General test methods for insulation and sheathing materials of electric and optical cables. Part 21. Elastomeric compounds
Test method. Ozone resistance test, Heat elongation test, Immersion in mineral oil test
GB/T 2951.31-2008 General test methods for insulation and sheathing materials of electric and optical cables. Part 31. Polyvinyl chloride compounds
Special test methods High temperature pressure test Crack resistance test
GB/T 3048.4-2007 Test methods for electrical properties of electric cables and wires. Part 4. Conductor DC resistance test
GB/T 3048.5-2007 Test methods for electrical properties of electric wires and cables. Part 5. Insulation resistance test
GB/T 3048.8-2007 Test methods for electrical properties of electric wires and cables. Part 8. AC voltage test
GB/T 3953-2009 electrical round copper wire
GB/T 4910-2009 tinned round copper wire
GB/T 11019-2009 nickel-plated round copper wire
GB/T 12666.1-2008 Single wire and cable fire test method Part 1. Vertical fire test
GB/T 12666.2-2008 Single wire and cable fire test method Part 2. Horizontal fire test
GB/T 17650.1 Test methods for materials released from cables or optical cables during combustion. Part 1. Total halogen acid gas
Determination
GB/T 17650.2 Test method for materials released from cables or optical cables during combustion. Part 2. Measurement of pH and
Conductivity to determine the acidity of a gas
GB/T 17651.2 Measurement of smoke density of cables or optical cables burning under specific conditions. Part 2. Test procedures and requirements
JB/T 3135-2011 silver-plated soft round copper wire
ISO 1817 Determination of liquid resistance of vulcanized rubber or thermoplastic rubber (Rubber, vulcanized-Determinationof […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 38 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38296-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 38296-2019
$790.00