Valid

GB/T 38267-2019Numerical control system of machine tool—Programming code (English PDF)

机床数控系统 编程代码

Preview PDF

This is a limited preview

Buy now to download the full PDF (27 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38267-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 10, 2019

Implementation date

July 1, 2020

Scope

GB/T 38267-2019 is the English-translated version of 机床数控系统 编程代码.

GB/T 38267-2019 is the Chinese standard "Numerical control system of machine tool—Programming code". Its scope clause reads: This standard specifies the programming code format and content of machine tool CNC system, including. program format and requirements, function code, interpolation programming and machine Bed power is on by default.

This standard applies to machine tool CNC systems. For other uses of CNC system, please refer to this standard. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38267-2019

National Standard of the People's Republic of China

ICS
25.040.20
Classification
J 50

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword III
  • Introduction IV
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Program format and requirements
  • 4.1 Program Format
  • 4.2 Program number
  • 4.3 Character
  • 4.4 Value
  • 4.5 Variable
  • 4.6 Block
  • 4.7 Program Note
  • 4.8 Program jump
  • 4.9 Subroutine
  • 4.10 Program End
  • 4.11 Program Interchange
  • 5 Function code
  • 5.1 Overview
  • 5.2 Modal and Modal Groups
  • 5.3 Preparation function
  • 5.4 Thread cutting function
  • 5.5 Feed function
  • 5.6 Accessibility
  • 5.7 Spindle Functions
  • 5.8 Tool functions
  • 5.9 Pause Function
  • 5.10 Sorting Function Codes
  • 6 Interpolation Programming
  • 6.1 General rules
  • 6.2 Linear interpolation
  • 6.3 Circular interpolation
  • 6.4 Parabolic interpolation
  • 6.5 Polar coordinate interpolation
  • 6.6 Cylindrical interpolation
  • 6.7 NURBS interpolation
  • 6.8 Five-axis interpolation
  • 7 Default state
  • 7.1 Overview
  • 7.2 Milling Machines (Machining Centers)
  • 7.3 Lathes
  • Appendix A (Normative) Character Code
  • Appendix B (Informative) Procedure Exchange
  • Appendix C (informative) Canned cycle code
  • Appendix D (informative) Example of interpolation function
  • References

1 Scope

This standard specifies the programming code format and content of machine tool CNC system, including. program format and requirements, function code, interpolation programming and machine

Bed power is on by default.

This standard applies to machine tool CNC systems. For other uses of CNC system, please refer to this standard.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 8129-2015 Vocabulary for numerical control of machine tools in industrial automation systems

GB/T 13000-2010 Information Technology Universal Multi-octet Coded Character Set (UCS)

3 terms and definitions

The terms and definitions defined in GB/T 8129-2015 and the following apply to this document. For ease of use, the following is repeated

Certain terms and definitions in GB/T 8129-2015.

3.1 Program

A collection of code sequences that control a CNC machine to complete a part.

3.2 Programming code

The instructions written in the prescribed language and format are used to control the NC machine tool to execute the set trajectory and actions.

3.3 Block

A set of instruction words in a (NC) program in order to achieve an operation.

Note 1. Each block is separated by the end character of the block.

Note 2. In the positioning system, a block includes the coordinate value of the position and the auxiliary function instructions to complete the operation.

[GB/T 8129-2015, definition 3.3.2]

3.4 Character

A set of element symbols used to represent, organize, or control data.

Note. Characters can be classified according to Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38267-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
27 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38267-2019

$535.00