Valid

GB/T 38204-2019Geotechnical engineering instrument—Inclino meters (English PDF)

岩土工程仪器 测斜仪

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38204-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 4, 2019

Implementation date

January 1, 2020

Scope

GB/T 38204-2019 is the English-translated version of 岩土工程仪器 测斜仪.

GB/T 38204-2019 is the Chinese standard "Geotechnical engineering instrument—Inclino meters". Its scope clause reads: This standard specifies the product classification and composition, technical requirements, test methods and inspections of geotechnical instrument inclinometers (hereinafter referred to as inclinometers).

Inspection rules, signs and instructions for use, packaging, transportation and storage. This standard is applicable to inclinometers used for safety monitoring in civil engineering such as dams, slopes, foundation pits, ports and underground construction projects.

Its clauses include terms and definitions; product classification and composition.

Found what you need?

Document preview — GB/T 38204-2019

National Standard of the People's Republic of China

ICS
07.060
Classification
P 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Product Classification and Composition
  • 4.1 Product Classification
  • 4.2 Product Composition
  • 5 Technical requirements
  • 5.1 Appearance
  • 5.2 Environmental conditions
  • 5.3 Basic performance parameters
  • 5.4 Insulation performance
  • 5.5 Waterproof sealing
  • 5.6 Temperature measurement error
  • 5.7 Temperature influence error
  • 5.8 Stability
  • 5.9 Mechanical environment adaptability
  • 5.10 Reliability
  • 6 Test method
  • 6.1 Test conditions
  • 6.2 Test equipment
  • 6.3 Contents of the test method
  • 7 Inspection rules
  • 7.1 Factory inspection
  • 7.2 Type inspection
  • 8 logo and instruction manual
  • 8.1 Mark
  • 8.2 User Manual
  • 9 Packaging, transportation and storage
  • 9.1 Packing
  • 9.2 Transportation
  • 9.3 Storage
  • Appendix A (informative) Inclinometer test record table

1 Scope

This standard specifies the product classification and composition, technical requirements, test methods and inspections of geotechnical instrument inclinometers (hereinafter referred to as inclinometers).

Inspection rules, signs and instructions for use, packaging, transportation and storage.

This standard is applicable to inclinometers used for safety monitoring in civil engineering such as dams, slopes, foundation pits, ports and underground construction projects.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191 packaging storage and transportation icon

GB/T 5080.7 Equipment reliability test Verification efficiency test plan for failure rate and mean time between failures under the assumption of constant failure rate

GB/T 6388 transport packaging receipt and delivery mark

GB/T 9969 General guidelines for the use of industrial products

General technical conditions for GB/T 13384 mechanical and electrical product packaging

GB/T 24105 basic environmental test conditions and methods for geotechnical engineering instruments

GB/T 24106 geotechnical engineering terminology and symbols

JJF1001 General Measurement Terms and Definitions

3 Terms and definitions

The following terms and definitions defined in GB/T 24106 and JJF1001 apply to this document.

3.1 Comprehensive error combinederror

The maximum deviation between the measured value and the agreed true value.

Note. The integrated error is expressed as a percentage of its full-scale output.

4 Product classification and composition

4.1 Product Classification

4.1.1

The inclinometer can be divided into. according to the working mode.

a) movable inclinometer;

b) Fixed inclinometer.

4.1.2

The inclinometer can be divided into. according to the working principle.

a) servo accelerometer inclinometer;

b) electrolyte type inclinometer;

c) resistance strain gauge inclinometer;

d) vibrating wire inclinometer;

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38204-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38204-2019

$205.00