Valid

GB/T 38125-2019Autosampler for liquid chromatography (English PDF)

液相色谱仪用自动进样器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38125-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 18, 2019

Implementation date

February 1, 2020

Scope

GB/T 38125-2019 is the English-translated version of 液相色谱仪用自动进样器.

GB/T 38125-2019 is the Chinese standard "Autosampler for liquid chromatography". Its scope clause reads: This standard specifies the requirements, test methods, inspection rules and marking, packaging, transportation and storage of the autosampler for liquid chromatography.

This standard is applicable to the automatic sampler for liquid chromatographs that can automatically complete the quantitative sampling and injection process through parameter setting. Called the injector). Its clauses include requirements.

Found what you need?

Document preview — GB/T 38125-2019

National Standard of the People's Republic of China

ICS
17.180.99
Classification
N 52

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 requirements
  • 3.1 Normal working conditions
  • 3.2 Appearance
  • 3.3 Sealing

1 Scope

This standard specifies the requirements, test methods, inspection rules and marking, packaging, transportation and storage of the autosampler for liquid chromatography.

This standard is applicable to the automatic sampler for liquid chromatographs that can automatically complete the quantitative sampling and injection process through parameter setting.

Called the injector).

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191-2008 packaging storage and transportation icon

GB/T 2829-2002 Periodic inspection technique sampling procedures and tables (applicable to the inspection of process stability)

GB/T 6682-2008 Analytical laboratory water specifications and test methods

GB/T 11606-2007 Analytical instrument environmental test method

GB/T 12519-2010 General technical conditions for analytical instruments

GB/T 13384-2008 General technical conditions for mechanical and electrical product packaging

Standard column for GB/T 30433 liquid chromatograph test

GB/T 34065-2017 Safety requirements for analytical instruments

3 requirements

3.1 Normal working conditions

The normal working conditions of the injector are as follows.

a) Ambient temperature. 5 ° C ~ 35 ° C;

b) Relative humidity. 20%~80%;

c) atmospheric pressure. 75kPa~106kPa;

d) Power supply. AC voltage 220V±22V, frequency 50Hz±0.5Hz;

e) Grounding resistance <= 4ohm;

f) indoors should avoid flammable, explosive and corrosive gases and strong vibration, electromagnetic interference and air convection;

g) The room should be well ventilated.

3.2 Appearance

3.2.1

The appearance of the instrument should be smooth and clear, the writing should be clear, the surface should be coated with uniform color, and there should be no obvious scratches, exposed bottoms, cracks, blistering, burrs, etc.

phenomenon.

3.2.2 Each adjustment knob, button, switch, etc

should work normally without looseness; the indication and display should be clear and complete.

3.2.3

The running parts should run smoothly without abnormal noise.

3.3 Sealing

The injector is at a maximum withstand pressure of 90% for 10 min and the pressure drop should be no more than 1.5 MPa.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38125-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38125-2019

$205.00