Valid

GB/T 38118-2019General technical specification for mobile laboratory of rapid surface water detection (English PDF)

地表水快速检测移动实验室通用技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (30 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38118-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 18, 2019

Implementation date

May 1, 2020

Scope

GB/T 38118-2019 is the English-translated version of 地表水快速检测移动实验室通用技术规范.

GB/T 38118-2019 fixes the technical requirements and test methods for mobile laboratories used in the rapid testing of surface water, together with their terms and definitions and the provisions on signs, documents, transport and storage.

Clause 1 applies it to land-based mobile laboratories used for the rapid determination of surface water parameters, and the page records no exclusions.

Its contents list names clause 4 on technical requirements, clause 5 on test methods and clause 6 on signs, documents, transport and storage, followed by eight appendices: informative ones on sample collection and preservation requirements, the monitoring items of such a laboratory, a reference equipment configuration and the communication protocol, and normative ones on the analysis methods, two sets of internal quality control provisions, and the method detection limits, blanks and quality control indicators.

Clause 3 draws its terms from HJ/T 91-2002 and GB/T 29479-2012 and repeats some of them, including the definition of a mobile laboratory as a laboratory of complete sets of equipment that performs testing, calibration or scientific experiments in a mobile facility and environment meeting specific purposes and requirements.

The normative references combine the mobile laboratory series GB/T 29473-2012, GB/T 29474-2012, GB/T 29476-2012 to GB/T 29479-2012 and GB/T 31016-2014, on classification and marking, interior materials, equipment, the test chamber, hazardous waste management, general requirements and sample collection and processing, with vehicle standards such as GB 1589 on outline dimensions, axle loads and mass limits, GB/T 12673-1990 and GB/T 12674-1990 on measuring vehicle dimensions and mass parameters and QC/T 476-2007 on rain tightness, and with water testing documents including GB 3838-2002 on surface water environmental quality, HJ/T 91-2002 on surface water and wastewater monitoring, GB/T 6682-2008 on laboratory water and GB/T 11606-2007 on the environmental testing of analytical instruments.

The standard was proposed and is managed by the National Mobile Laboratories Standardization Technical Committee (SAC/TC509), and the drafting bodies are environmental monitoring stations together with measurement and control, environmental protection and special vehicle manufacturers.

It carries ICS code 19.020 and Chinese classification Z04, was issued on 18 October 2019 and has applied since 1 May 2020.

Found what you need?

Document preview — GB/T 38118-2019

National Standard of the People's Republic of China

ICS
19.020
Classification
Z 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Technical requirements
  • 5 Test method
  • 6 Signs, documents, transportation and storage
  • Appendix A (informative) Sample collection and preservation requirements
  • Appendix B (informative appendix) Surface Water Rapid Detection Mobile Laboratory Monitoring Project
  • Appendix C (informative appendix) Surface water rapid detection mobile laboratory equipment configuration reference
  • Appendix D (normative appendix) Surface water rapid detection mobile laboratory analysis method
  • Appendix E (Normative Appendix) Surface Water Rapid Testing Mobile Laboratory Internal Quality Control 1
  • Appendix F (Normative Appendix) Surface Water Rapid Testing Mobile Laboratory Internal Quality Control 2
  • Appendix G (normative appendix) Surface water rapid detection mobile laboratory method detection limit, blank, quality control indicators
  • Appendix H (informative appendix) Surface Water Rapid Detection Mobile Laboratory Communication Protocol

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the terms and definitions, technical requirements, test methods, signs, documents, transportation and storage of the Surface Water Rapid Testing Mobile Laboratory (hereinafter referred to as the Mobile Laboratory).

This standard applies to mobile laboratories using land for rapid detection of surface water parameters.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB 1589 Car, trailer and car train profile size, axle load and mass limit

GB 3838-2002 Surface Water Environmental Quality Standard

GB/T 6682-2008 Analytical laboratory water specifications and test methods

GB/T 8170-2008 Numerical rounding rules and the representation and determination of limit values

GB/T 11606-2007 Analytical instrument environmental test method

GB/T 12673-1990 Main dimensions measurement method for automobiles

GB/T 12674-1990 Method for determining the mass (weight) parameters of automobiles

GB/T 29473-2012 Mobile laboratory classification, code and marking

GB/T 29474-2012 General specifications for interior materials for mobile laboratories

GB/T 29476-2012 General specification for equipment for mobile laboratory equipment

GB/T 29477-2012 Mobile laboratory test chamber general technical specifications

GB/T 29478-2012 Mobile Laboratory Hazardous Waste Management Regulations

GB/T 29479-2012 General requirements for mobile laboratories

GB/T 31016-2014 General specification for sample collection and processing of mobile laboratories

HJ/T 91-2002 Technical Specifications for Surface Water and Wastewater Monitoring

QC/T 476-2007 Passenger car rain tightness limit and test method

3 Terms and definitions

The following terms and definitions defined by HJ/T 91-2002 and GB/T 29479-2012 apply to this document. For ease of use, some terms and definitions in HJ/T 91-2002 and GB/T 29479-2012 are repeated below.

3.1 Mobile laboratory

A laboratory consisting of complete sets of equipment, which performs testing, calibration or scientific experiments in a mobile facility and environment that meets specific purposes and requirements. [GB/T 29479-2012, definition 3.1]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 38118-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
30 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38118-2019

$535.00