GB/T 37986-2019General technical specification for mobile laboratory of engineering test (English PDF)
工程检测移动实验室通用技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37986-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37986-2019 is the English-translated version of 工程检测移动实验室通用技术规范.
GB/T 37986-2019 is the Chinese standard "General technical specification for mobile laboratory of engineering test". Its scope clause reads: This standard specifies the general technical requirements for engineering testing mobile laboratories and describes the corresponding test methods.
This standard applies to the design, manufacture, inspection and use of mobile laboratories for construction engineering testing. Its clauses include terms and definitions; classification.
Found what you need?
Document preview — GB/T 37986-2019
National Standard of the People's Republic of China
- ICS
- 19.020
- Classification
- A 20
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Category
- 5 General requirements
- 6 Technical requirements
- 7 Test method
1 Scope
This standard specifies the general technical requirements for engineering testing mobile laboratories and describes the corresponding test methods.
This standard applies to the design, manufacture, inspection and use of mobile laboratories for construction engineering testing.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2423.1 Environmental testing of electrical and electronic products - Part 2. Test methods Test A. Low temperature
GB/T 2423.2 Environmental testing of electrical and electronic products - Part 2. Test methods Test B. High temperature
GB/T 2423.3 Environmental testing - Part 2. Test method test Cab. constant damp heat test
GB/T 2423.17 Environmental testing of electric and electronic products - Part 2. Test method test Ka. salt spray
GB/T 2423.21 Environmental testing of electric and electronic products - Part 2. Test method Test M. Low pressure
GB 7258 Motorcycle Operation Safety Technical Conditions
GB 14023 Vehicle, ship and internal combustion engine radio disturbance characteristics for the protection of off-board receiver limits and measurement methods
GB/T 18655 Vehicle, ship and internal combustion engine radio disturbance characteristics for the protection of on-board receiver limits and measurement methods
GB/T 23334 open passenger car safety top window
GB/T 25480-2010 Basic environmental conditions and test methods for instrumentation transportation and storage
GB/T 29477 General specifications for mobile laboratory test chambers
GB/T 29479 General requirements for mobile laboratories
GB/T 31017 Mobile Lab Terminology
GB/T 33253 General specifications for mobile laboratory vehicles
GB/T 33709-2017 Mobile laboratory equipment value traceability and transmission guide
GJB2093A-2012 General test method for military cabins
JJF1101-2003 Environmental test equipment temperature and humidity calibration specification
QC/T 452-1999 General technical conditions for accommodation vehicles
QC/T 476-2007 Passenger car rain tightness limit and test method
3 Terms and definitions
The following terms and definitions as defined in GB/T 31017 apply to this document.
3.1 Engineering testing mobile laboratory
A mobile laboratory consisting of complete sets of equipment and facilities for engineering quality testing.
4 classification
The engineering inspection mobile laboratory is divided into self-propelled (Z) and square cabin (F) according to the mode of transport.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37986-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37986-2019
$205.00