Valid

GB/T 37955-2019Information security technology—Security technique requirements for numerical control network (English PDF)

信息安全技术 数控网络安全技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37955-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 30, 2019

Implementation date

March 1, 2020

Scope

GB/T 37955-2019 is the English-translated version of 信息安全技术 数控网络安全技术要求.

GB/T 37955-2019 is the Chinese standard "Information security technology—Security technique requirements for numerical control network". Its scope clause reads: This standard proposes the security protection principles for CNC networks in digital factories or digital workshops, and specifies the security technical requirements for CNC networks.

Requirements, including equipment security technical requirements, network security technical requirements, application security technical requirements and data security technical requirements.

This standard applies to the planning, design, inspection and evaluation of CNC network security protection. Its clauses include terms and definitions; abbreviations; overview; equipment safety technical requirements.

Found what you need?

Document preview — GB/T 37955-2019

National Standard of the People's Republic of China

ICS
35.040
Classification
L 80

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Abbreviations
  • 5 Overview
  • 5.1 CNC Network Security Framework
  • 5.2 Principles of CNC Network Information Security Protection
  • 5.3 Safety technical requirements
  • 5.4 Classification of safety technical requirements
  • 6 Equipment safety technical requirements
  • 6.1 Safety technical requirements for NC server and acquisition server
  • 6.2 Safety technical requirements for CNC equipment
  • 6.3 Safety technical requirements for network communication equipment
  • 7 Cyber security technical requirements
  • 7.1 Network Architecture
  • 7.2 Border protection
  • 7.3 Access Control
  • 7.4 Intrusion Prevention
  • 7.5 Wireless usage control
  • 7.6 Security Audit
  • 7.7 Centralized Management and Control
  • 8 Application safety technical requirements
  • 8.1 Identification
  • 8.2 Access Control
  • 8.3 Resource control
  • 8.4 Software fault tolerance
  • 8.5 Security Audit
  • 9 Data Security Technical Requirements
  • 9.1 Data integrity
  • 9.2 Data confidentiality
  • 9.3 Data backup and recovery
  • 9.4 Protection of remaining information
  • Appendix A (informative appendix) CNC network reference model
  • Appendix B (informative appendix) Information security risks faced by CNC networks

1 Scope

This standard proposes the security protection principles for CNC networks in digital factories or digital workshops, and specifies the security technical requirements for CNC networks.

Requirements, including equipment security technical requirements, network security technical requirements, application security technical requirements and data security technical requirements.

This standard applies to the planning, design, inspection and evaluation of CNC network security protection.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 25069-2010 Information Security Technical Terms

3 Terms and definitions

The following terms and definitions defined in GB/T 25069-2010 apply to this document.

3.1 techy's equipment

According to a pre-programmed program, the control system sends out digital information instructions to control the working process.

Note 1.Rewrite GB/T 6477-2008, definition 2.1.26.

Note 2.Common CNC equipment includes. CNC machine tools, CNC cutting machines, three-coordinate measuring instruments, etc.

3.2 CNC system

The control system that uses numerical data on numerical control equipment continuously introduces numerical data during operation to realize the

Process automation control.

Note. Rewrite GB/T 26220-2010, definition 3.1.

3.3 CNC code

The instruction set used to control the operation of CNC equipment.

3.4 CNC network

A network composed of digital control servers, acquisition servers, numerical control equipment, and network communication equipment.

Note. The centralized control of numerical control equipment is realized in the numerical control network, as well as the control instructions and equipment between the digital control server, acquisition server and numerical control equipment.

The transmission of equipment status information.

3.5 area

A collection of logical assets or physical assets that share the same information security requirements.

Note. The area has clear boundaries. The information security policy of an information security zone must be enforced within and on its borders.

[GB/T 35673-2017, definition 3.1.47]

4 Abbreviations

The following abbreviations apply to this document.

5 overview

5.1 CNC Cyber Security Framework

The numerical control network is composed of a numerical control server (ie, NC server), a collection server, numerical control equipment, and network communication equipment. CNC Refer to Appendix A for the reference model of the network. Installation and operation of equipment (CNC equipment, acquisition server, NC server, network communication equipment), equipment

The operating system, application software, stored data, and communication between devices (wired, wireless) are the objects of protection covered by this standard.

Refer to Appendix B for the information security risks faced by CNC networks. Aiming at the security risks and protection objects faced by CNC networks, this

The standard proposes a CNC network security framework, as shown in Figure 1.Chapter 6, Chapter 7, Chapter 8, Chapter 9 of this standard are based on the security framework and

The CNC network security protection principles in 5.2 put forward specific security technical requirements for each item.

Figure 1 CNC network security framework

5.2 Principles of CNC Network Information Security Protection

The security protection of CNC network information should follow the following principles.

a) Internet available

The use of various safety protection measures should not affect the normal operation of the CNC network and the interaction between the CNC network and external networks.

b) Network isolation

The CNC network should only be used for CNC production and processing business, a dedicated physical network should be used, and the interaction with external networks should be effective

Safety protection measures.

c) Divisional defense

The numerical control network should be divided into numerical control network-supervisory control area and numerical control network-numerical control equipment area. CNC Network-CNC Equipment

The area can be further divided into different sub-areas according to the production function. Different areas should be protected according to safety requirements.

Protection measures. On the premise of not affecting the work of each area, safety isolation measures should be taken at the boundary of each area to ensure that each area

There is a clear boundary setting between them, and the security of each regional boundary is guaranteed.

d) Comprehensive protection

The security protection of the CNC network can be achieved through physical access control measures, management measures and technical measures. Protection of a single device

The use of protection, single protection measures, or single protection products cannot effectively protect the CNC network.

A security mechanism and multi-layer protection strategy.

Note. See the requirements in GB/T 22239 for physical access control measures.

5.3 Safety technical requirements

This standard proposes equipment security technical requirements, network security technical requirements, application security technical requirements, data security technical requirements and collections.

Central management and control technology requirements.

The equipment safety technical requirements are for the operating system on the acquisition server in the CNC network, the operating system and database system on the NC server.

System, the operating system of the CNC system on the CNC equipment and the network communication equipment in the CNC network from identity authentication, access control, intrusion prevention,

Provisions are made for resource control, malicious code prevention, and security auditing.

The network security technology requires from the network architecture, CNC network and management network, and the boundary between different security areas within the CNC network

Provisions are made for protection, access control, intrusion prevention, security auditing, and use control of wireless networks in CNC networks.

Application security technology requires the identification of various application software installed on the acquisition server, NC server, and numerical control equipment.

Provisions are made in terms of security, access control, resource control, software fault tolerance, and security audits.

Data security technical requirements are for the NC codes, process files, audit records, etc. stored on the equipment and the NC codes transmitted between the equipment,

Data such as equipment status information is specified in terms of data integrity, data confidentiality, data backup and recovery, and remaining information protection.

According to the business type, classify the business sensitive data of CNC network and take corresponding protection measures.

Centralized management and control technology requirements stipulate the centralized management of various security mechanisms implemented by security equipment and security components in the CNC network.

5.4 Classification of safety technical requirements

This standard divides various requirements into basic requirements and enhanced requirements according to the needs of CNC networks for security protection capabilities. The enhancement request is right

Supplement and enhancement of basic requirements.

6 Equipment safety technical requirements

6.1 Safety technical requirements for NC server and acquisition server

6.1.1 Identity authentication
6.1.1.1 Basic requirements

The basic requirements include.

a) It shall be able to uniquely identify and authenticate logging in the NC server operating system, collecting server operating system and NC server data

Users of the library system;

b) It should be possible to compulsorily configure the NC server operating system and acquisition server by setting the minimum length and multiple character types

The user password strength of the operating system and NC server database system;

c) The user's password should be stored encrypted;

d) Thresholds should be set for consecutive invalid access attempts, and within the specified time period, the NC server operating system and collection service

When the number of access attempts of the server operating system and NC server database system exceeds the threshold, it should be able to alert and lock

Set until the administrator unlocks.

6.1.1.2 Enhanced requirements

The enhancement requirements include.

a) Any existing users of NC server operating system, acquisition server operating system and NC server database system should be prevented

The account uses the same password repeatedly;

b) It should have the function of handling login failures, and take measures such as ending the session and automatically exiting after the login connection timeout;

c) It should be able to uniquely identify all equipment;

d) The longest and shortest validity periods of user passwords should be restricted;

e) It should be able to hide the authentication information feedback during the authentication process;

f) Two or more authentication technologies should be provided for identity authentication, at least one of which is unforgeable.

6.1.2 Access Control
6.1.2.1 Basic requirements

The basic requirements include.

a) Accounts and permissions should be assigned to users who log in to the NC server, collection server operating system and NC server database system,

According to the user's role, only the minimum permissions required by the user are granted.

b) Authorized users of NC server, collection server operating system and NC server database system shall be supported to manage all accounts,

Including adding, activating, modifying, deactivating and deleting accounts.

c) Should support renaming and modification of the default account of NC server, collection server operating system and NC server database system

The default password of the default account.

d) It shall support the deletion or disabling of redundant and outdated NC server, collection server operating system and NC server database system

Account, avoid the existence of shared accounts.

e) It should be able to configure the inactive time period, and the operation of the NC server, the collection server operating system and the NC server database system

Users should automatically start after the inactive time period specified in the security policy or manually initiate session lock to prevent further access. The session lock should remain effective until the person initiating the session or other authorized personnel uses the appropriate identification

And authentication re-establish access.

f) Authorized users or roles of NC server, collection server operating system and NC server database system shall be supported for all

The user's authority mapping is specified and modified.

6.1.2.2 Enhanced requirements

The enhancement requirements include.

a) It should be able to set the operation timeout for the acquisition server accessing the NC server, and automatically lock it after the timeout;

b) Authorized personnel should be supported to configure access control strategies, which stipulate user access rules to resources;

c) The granularity of access control should be such that the access subject is the user or software process, and the accessible resources are files and database tables;

d) Important information resources such as NC code and user authentication information should be set up with sensitive marks, and users should be strictly controlled in accordance with security policies.

Operate on important information resources with sensitive marks.

6.1.3 Intrusion Prevention
6.1.3.1 Basic requirements

The basic requirements include.

a) The operating system of the acquisition server and NC server should adopt the minimum installation principle, and only install the necessary components and application software;

b) The use of peripheral ports and wireless functions such as the USB of the acquisition server and NC server should be clearly blocked or restricted;

c) Unauthorized mobile devices are not allowed to connect to the collection server or NC server, and are not allowed to authorize mobile devices to exceed their rights

Limited operations;

d) It is not allowed to communicate with users or systems outside the CNC network through the instant messaging system;

e) Unnecessary system services, default sharing and ports should be closed.

6.1.3.2 Enhanced requirements

The enhancement requirements include.

a) Only authorized collection servers should be allowed to access the NC server, and only authorized mobile devices should be allowed to access the collection server and NC server;

b) The vulnerabilities in the collection server and NC server operating system should be patched in time after full testing and evaluation

It should not affect normal production.

Note. To ensure the normal progress of production, loophole patch testing and loophole patching can be performed during planned or unplanned system maintenance.

6.1.4 Resource Control
6.1.4.1 Basic requirements

The basic requirements include.

a) The network and security configuration recommended in the guide provided by the supplier should be set up;

b) The operating resources of the equipment should be monitored, including but not limited to the use of CPU, hard disk, memory and other resources;

c) Hardware redundancy of NC servers and industrial switches should be provided to ensure the availability of the system.

6.1.4.2 Enhanced requirements

The enhancement requirements include.

a) It should be able to set a threshold for the resource usage of the device, and give an alarm when the threshold is reached;

b) It should be able to limit the number of concurrent sessions on the device interface, and the number of sessions is configurable;

c) It should be able to generate a list of the current security configuration of the equipment.

6.1.5 Malicious code prevention
6.1.5.1 Basic requirements

The basic requirements include.

a) Malicious code protection mechanisms should be deployed on the collection server and NC server to achieve the purpose of preventing malicious code;

b) The protection of the malicious code of the collection server and NC server should not change the configuration of the system, read sensitive information, and consume a large amount of system

Resources or affect the availability of the system;

c) The use of mobile code technologies that may cause damage should be restricted on the acquisition server and NC server, including but not limited to preventing migration

Execution of mobile code, identification and authorization of the source of mobile code, and monitoring of the use of mobile code;

Note 1.Mobile code refers to programs or plug-ins such as Java, JavaScript, ActiveX, etc.

d) The protection mechanism of malicious code on the collection server and NC server should be upgraded regularly.

Normal production should be affected and the upgrade content should be fully tested.

Note 2.To ensure the normal progress of production, malicious code protection mechanisms can be upgraded and tested during planned or unplanned system maintenance.

6.1.5.2 Enhanced requirements

The enhancement requirements include.

a) The integrity of the mobile code should be checked before the execution of the mobile code;

b) Before updating the malicious code library, Trojan horse library, and rule library, you should first pass the test in the test environment.

The code update should have a dedicated person responsible, the update operation should be performed offline, and the update record should be kept.

6.1.6 Security Audit
6.1.6.1 Basic requirements

The basic requirements include.

a) Responses include, but are not limited to, user login to the operating system, access to NC code, NC code transmission, request errors, backup and restoration

Auditing security events such as recovery and configuration changes;

b) Audit records should include but are not limited to timestamp, source, category, event identification and event results, etc.;

c) The equipment should be equipped with sufficient audit record storage capacity;

d) The audit records of the equipment should be protected through access control, encrypted storage, etc.;

e) When the audit record is generated, the equipment should provide a time stamp;

f) Audit records should be backed up regularly to avoid losing audit information due to unexpected deletion, modification or overwriting;

g) It should be possible to configure the clock synchronization frequency and synchronize the system clock according to the set frequency.

6.1.6.2 Enhanced requirements

The enhancement requirements include.

a) When the audit fails, including but not limited to software or hardware errors, failure of the audit capture mechanism, saturation or overflow of audit storage capacity,

Should be able to alert and take appropriate measures (such as overwriting the oldest audit records or stopping the generation of audit logs);

b) It should be able to configure the threshold of the audit storage capacity, and an alarm should be able to be issued when the audit record storage value reaches the threshold of the audit storage capacity;

c) It should be possible to write audit records to non-volatile storage media;

d) It should be able to provide an interface for centralized audit management and upload audit records generated by itself;

e) It should be possible to access audit records programmatically.

6.2 Safety technical requirements for CNC equipment

6.2.1 Identity authentication
6.2.1.1 Basic requirements

The basic requirements include.

a) It should be able to uniquely identify and authenticate users who log in to the operating system of the CNC equipment;

b) It should be able to uniquely identify the user group and role of the CNC equipment operating system;

c) It should be possible to set the minimum length and multiple character types to achieve the mandatory configuration of the password strength of the numerical control equipment;

e) The operating system user of the numerical control equipment should set a threshold for the number of consecutive invalid access attempts within the specified time period.

When the number of attempts reaches the threshold, it should be able to give an alarm and lock it within a specified time or until the administrator unlocks it.

6.2.1.2 Enhanced requirements

The enhancement requirements include.

a) Any existing user accounts in the operating system of the CNC equipment should be prevented from reusing the same password;

b) It should be able to uniquely identify all equipment;

c) The longest and shortest validity periods of user passwords should be restricted;

d) It should be able to hide the authentication information feedback during the authentication process;

e) Two or more authentication technologies should be provided for identity authentication, at least one of which is unforgeable.

Note. For devices that cannot support the deployment of identity authentication measures, compensation control measures can be provided through physical access control.

6.2.2 Access Control
6.2.2.1 Basic requirements

The basic requirements include.

a) Accounts and permissions should be assigned to users who log in to the CNC equipment operating system, follow the principle of separation of duties, and only grant them based on the user's role

The minimum permissions required by the user.

b) Should support the CNC equipment operating system authorized users to manage all accounts, including adding, activating, modifying, deactivating and deleting accounts.

d) Support deleting or disabling redundant and expired accounts of the CNC equipment operating system to avoid the existence of shared accounts.

e) It should support the configuration of inactive time. After the inactive time is exceeded, the user of the CNC equipment operating system should automatically start or manually start it.

Active session lock prevents further access. The session lock should remain in effect until the person who owns the session or other authorized persons

The personnel re-establish access using appropriate identification and authentication.

f) The authorized users or roles of the operating system of CNC equipment shall be supported to specify and modify the authority mapping of all users.

6.2.2.2 Enhanced requirements

The enhancement requirements include.

a) Authorized personnel should be supported to configure access control strategies, which stipulate user access rules to resources;

b) Important information resources such as NC code and user authentication information should be set with sensitive marks, and users should be strictly controlled in accordance with security policies.

Operate on important information resources with sensitive marks.

Note. For devices that cannot support the deployment of access control measures, corresponding compensation control measures can be provided through physical access control and personnel management.

6.2.3 Intrusion Prevention
6.2.3.1 Basic requirements

The basic requirements include.

a) The operating system of the numerical control equipment should adopt the minimum installation principle, and only install the necessary components and application software;

b) The use of peripheral ports such as USB and wireless functions of CNC equipment should be clearly bl...

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37955-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37955-2019

$265.00