GB/T 37949-2019Purity test method of small molecule materials applied in organic light emitting diode display (OLED)—High performance liquid chromatography (HPLC) (English PDF)
有机发光二极管显示器用有机小分子发光材料纯度测定 高效液相色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37949-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
December 1, 2019
Scope
GB/T 37949-2019 is the English-translated version of 有机发光二极管显示器用有机小分子发光材料纯度测定 高效液相色谱法.
GB/T 37949-2019 is the Chinese standard "Purity test method of small molecule materials applied in organic light emitting diode display (OLED)—High performance liquid chromatography (HPLC)".
Its scope clause reads: This standard specifies the determination of organic small molecular materials in materials for organic light-emitting diode displays by high performance liquid chromatography (HPLC).
(hereinafter referred to as OLED organic small molecule material) test method for purity. This standard applies to OLED organic small molecule materials that can be detected and stabilized by HPLC.
Its clauses include terms and definitions; principle; water, reagents and solvents.
Found what you need?
Document preview — GB/T 37949-2019
National Standard of the People's Republic of China
- ICS
- 31.030
- Classification
- L 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Principle
- 5 water, reagents and solvents
- 5.1 Water and reagents
- 5.2 Solvent
- 6 sampling
- 7 measuring equipment
- 8 Environmental conditions
- 9 sample preparation
- 9.1 Preparation of blank solution
- 9.2 Preparation of sample solution
- 9.3 Sample pre-column derivatization
- 10 Determination step
- 10.1 High Performance Liquid Chromatography Conditions
- 10.2 Determination
- 11 result calculation
- 11.1 Peak area measurement
- 11.2 Determination of purity
- 12 Data Quality Guarantee
- 12.1 Basic Requirements
- 12.2 Guarantee of instrument performance
- 12.3 Reliability of chromatographic methods and test results
1 Scope
This standard specifies the determination of organic small molecular materials in materials for organic light-emitting diode displays by high performance liquid chromatography (HPLC).
(hereinafter referred to as OLED organic small molecule material) test method for purity.
This standard applies to OLED organic small molecule materials that can be detected and stabilized by HPLC.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6679-2003 General rules for sampling of solid chemical products
GB/T 6682-2008 Analytical laboratory water specifications and test methods
GB/T 9008-2007 Liquid chromatography terminology column chromatography and plane chromatography
GB/T 16631-2008 General rules for high performance liquid chromatography
GB/T 26792-2011 High Performance Liquid Chromatograph
JJG705-2014 liquid chromatograph verification procedure
3 Terms and definitions
The terms and definitions defined in GB/T 9008-2007 and GB/T 16631-2008 apply to this document.
4 Principle
A sample solution of a certain concentration of OLED organic small molecule material is usually prepared by manual or automatic injection. OLED organic small points
The daughter material is separated by a column and then detected by the detector based on its physical, chemical or other characteristics. A typical detector for HPLC is UV Visible light detector. The detector takes the response of each component and converts it into an electrical signal, which is then sent to the data processor. Data processor based
The obtained chromatogram is subjected to various parameter calculations, and the analyte is subjected to purity analysis. Normalize the sum of all peak areas, the peak of one component
The ratio of the area to the total area of all peaks is the amount of this component in the sample.
5 water, reagents and solvents
5.1 Water and reagents
The reagents and water used in this standard are analytical grade reagents and the first grade specified in GB/T 6682-2008 when no other requirements are specified.
water. Water and reagents should not interfere with the analysis.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37949-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37949-2019
$145.00