GB/T 37933-2019Information security technology—Technical requirements of industrial control system dedicated firewall (English PDF)
信息安全技术 工业控制系统专用防火墙技术要求
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37933-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37933-2019 is the English-translated version of 信息安全技术 工业控制系统专用防火墙技术要求.
GB/T 37933-2019 is the Chinese standard "Information security technology—Technical requirements of industrial control system dedicated firewall".
Its scope clause reads: This standard specifies the security function requirements, self security requirements, performance requirements and security assurance requirements of industrial control system dedicated firewalls (hereinafter referred to as "industrial control firewalls").
This standard is applicable to the design, development and testing of industrial control firewalls. Its clauses include terms and definitions; abbreviations.
Found what you need?
Document preview — GB/T 37933-2019
National Standard of the People's Republic of China
- ICS
- 35.040
- Classification
- L 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword I
- Introduction II
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Abbreviations
- 5 Product description
- 6 Security technical requirements
- 6.1 Security technical requirements of basic level
- 6.1.1 Security function requirements
- 6.1.2 Self security requirements
- 6.1.3 Performance requirements
- 6.1.4 Security assurance requirements
- 6.2 Security technical requirements of enhanced level
- 6.2.1 Security function requirements
- 6.2.2 Self security requirements
- 6.2.3 Performance requirements
- 6.2.4 Security assurance requirements
- Annex A (Informative) Application of industrial control firewall
- Annex B (Normative) Environmental adaptability requirements
- Annex C (Informative) Control requirements for application layer of typical industrial control protocol
- Bibliography
1 Scope
This standard specifies the security function requirements, self security requirements, performance requirements and security assurance requirements of industrial control system dedicated firewalls (hereinafter referred to as "industrial control firewalls").
This standard is applicable to the design, development and testing of industrial control firewalls.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies
GB/T 2423.5-1995 Environmental testing for electric and electronic products - Part 2: Test methods - Test Ea and guidance: Shock
GB/T 2423.8-1995 Environmental testing for electric and electronic products - Part 2: Test methods - Test Ed: Free fall
GB/T 2423.10-2008 Environmental testing for electric and electronic products - Part 2: Tests methods - Test Fc: Vibration (sinusoidal)
GB/T 4208-2017 Degrees of protection provided by enclosure (IP code)
GB 4824-2013 Industrial, scientific and medical (ISM) radio-frequency equipment - Disturbance characteristics - Limits and methods of measurement
GB/T 9254-2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
GB/T 13729-2002 Remote terminal unit equipment
GB/T 15153.1-1998 Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility
GB/T 17214.4-2005 Operating conditions for industrial-process measurement and control equipment - Part 4: Corrosive and erosive influence
GB/T 17626.2-2018 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test
GB/T 17626.3-2016 Electromagnetic compatibility - Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.4-2018 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test
GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge immunity test
GB/T 17626.6-2017 Electromagnetic compatibility - Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
GB/T 17626.8-2006 Electromagnetic compatibility - Testing and measurement techniques - Power frequency magnetic field immunity test
GB/T 17626.10-2017 Electromagnetic compatibility - Testing and measurement techniques - Damped oscillatory magnetic field immunity test
GB/T 17626.11-2008 Electromagnetic compatibility - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
GB/T 17626.12-2013 Electromagnetic compatibility - Testing and measurement techniques - Ring wave immunity test
GB/T 17626.16-2007 Electromagnetic compatibility - Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
GB/T 17626.17-2005 Electromagnetic compatibility - Testing and measurement techniques - Ripple on d.c.input power port immunity test
GB/T 17626.18-2016 Electromagnetic compatibility - Testing and measurement techniques - Damped oscillatory wave immunity test
GB/T 17626.29-2006 Electromagnetic compatibility - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
GB/T 20281-2015 Information security technology - Security technical requirements and testing and evaluation approaches for firewall
GB/T 20438.3-2017 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
GB/T 20438.4-2017 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations
GB/T 25069-2010 Information security technology - Glossary
GB/T 32919-2016 Information security technology - Application guide to industrial control system security control
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 20281-2015, GB/T 20438.4-2017, GB/T 25069-2010 and GB/T 32919-2016 as well as the following apply.
3.1 industrial control protocol
protocol of communication message between the host computer and the control equipment and between the control equipment and control equipment in an industrial control system, usually including read-write control of analog and digital quantities
3.2 industrial control system dedicated firewall
security gateway products deployed between different security domains in the industrial control system or in front of the controller, with network layer access control and filtering functions, industrial control protocol inspection and filtering functions, and high availability, which can be applied in industrial control environments
4 Abbreviations
For the purposes of this document, the following abbreviations apply.
DMZ: Demilitarized Zone
DNAT: Destination Network Address Translation
ICMP: Internet Control Message Protocol
MAC: Media Access Control
NAT: Network Address Translation
OPC: Object Linking and Embedding for Process Control […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 37933-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 37933-2019
$475.00