GB/T 37911.2-2019Application interface of BDS timing for power system—Part 2:Testing specification (English PDF)
电力系统北斗卫星授时应用接口 第2部分:检测规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37911.2-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37911.2-2019 is the English-translated version of 电力系统北斗卫星授时应用接口 第2部分:检测规范.
GB/T 37911.2-2019 is the Chinese standard "Application interface of BDS timing for power system—Part 2:Testing specification". Its scope clause reads: This part of GB/T 37911 specifies the group of the power system Beidou satellite timing application interface and the Beidou satellite timing time synchronization device.
Formation, testing requirements, test methods, etc. This part is applicable to the detection of the Beidou satellite timing application interface of the power system and the Beidou satellite timing time synchronization device. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37911.2-2019
National Standard of the People's Republic of China
- ICS
- 33.200
- Classification
- M 50
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Abbreviations
- 5 Composition
- 5.1 Overview
- 5.2 Beidou satellite timing time synchronization device composition
- 5.3 Beidou satellite timing application interface composition
- 6 Testing requirements
- 6.1 Environmental conditions
- 6.2 Test Equipment
- 7 Test Method
- 7.1 Test principle
- 7.2 Interface Test
- 7.3 Functional Test
- 7.4 Environmental Test
- 7.5 Power Adaptation Test
- 7.6 Insulation performance test
- 7.7 Mechanical performance test
- 7.8 Electromagnetic Compatibility Test
1 Scope
This part of GB/T 37911 specifies the group of the power system Beidou satellite timing application interface and the Beidou satellite timing time synchronization device.
Formation, testing requirements, test methods, etc.
This part is applicable to the detection of the Beidou satellite timing application interface of the power system and the Beidou satellite timing time synchronization device.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2887-2011 General specification for computer sites
GB/T 9361-2011 Computer Site Safety Requirements
GB/T 13729-2002 Telecontrol terminal equipment
GB/T 17626.2-2018 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test
GB/T 17626.3-2016 Electromagnetic compatibility test and measurement technology RF electromagnetic field radiation immunity test
GB/T 17626.4-2018 Electromagnetic compatibility test and measurement technology Electrical fast transient burst immunity test
GB/T 17626.5-2008 Electromagnetic compatibility test and measurement technology Surge (impact) immunity test
GB/T 17626.6-2017 Electromagnetic compatibility test and measurement technology Conducted disturbance immunity of RF field induction
GB/T 17626.8-2006 Electromagnetic compatibility test and measurement technology Power frequency magnetic field immunity test
GB/T 17626.9-2011 Electromagnetic compatibility test and measurement technology Pulse magnetic field immunity test
GB/T 17626.10-2017 Electromagnetic compatibility test and measurement technique Damping oscillating magnetic field immunity test
GB/T 17626.12-2013 Electromagnetic compatibility test and measurement technology ringing wave immunity test
GB/T 17626.29-2006 Electromagnetic compatibility test and measurement technology DC power input port voltage dip, short interruption and
Immunity test for voltage changes
GB/T 19391-2003 Global Positioning System (GPS) terms and definitions
GB/T 26866-2011 Time synchronization system test specification for power systems
GB/T 37911.1-2019 Power system Beidou satellite timing application interface Part 1. Technical specifications
DL/T 1100.1-2018 Time synchronization systems for power systems - Part 1. Technical specification
3 Terms and definitions
The following terms and definitions as defined in GB/T 19391-2003 and DL/T 1100.1-2018 apply to this document. For convenience
For use, some of the terms and definitions in GB/T 19391-2003 and DL/T 1100.1-2018 are repeated below.
3.1 Coordinated Universal Time universaltimecoordinated; UTC
World time is used as the initial reference for time, and atomic time is used as the standard time based on time unit (s).
[GB/T 19391-2003, definition 5.3] […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37911.2-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 37911.1-2019 — Application interface of BDS timing for power system—Part 1: Technical specification
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 37911.2-2019
$210.00