GB/T 37904-2019Earth-moving machinery—Walking hydraulic excavators (English PDF)
土方机械 步履式液压挖掘机
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37904-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37904-2019 is the English-translated version of 土方机械 步履式液压挖掘机.
GB/T 37904-2019 is the Chinese standard "Earth-moving machinery—Walking hydraulic excavators". Its scope clause reads: This standard specifies the type and parameters, requirements, test methods, inspection rules, marking, packaging, transportation and Storage.
This standard applies to four-legged walking hydraulic excavators (hereinafter referred to as excavators).
Found what you need?
Document preview — GB/T 37904-2019
National Standard of the People's Republic of China
- ICS
- 53.100
- Classification
- P 97
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Model and parameters
- 5 Requirements
- 6 Test method
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- Appendix A (informative) Main parameters of walking hydraulic excavators Table
- Appendix B (informative appendix) Walking Excavator Test Record Table
1 Scope
This standard specifies the type and parameters, requirements, test methods, inspection rules, marking, packaging, transportation and
Storage.
This standard applies to four-legged walking hydraulic excavators (hereinafter referred to as excavators).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6572 earthmoving machinery hydraulic excavator terminology and commercial specifications
GB/T 7586-2018 earthmoving machinery hydraulic excavator test method
GB/T 8498 earthmoving machinery basic type identification, terminology and definition
GB/T 8592 Determination of the steering dimensions of earth-moving machinery and tires
GB/T 10913 earthmoving machine speed measurement
GB/T 13332 Earthmoving machinery hydraulic excavator and backhoe loader measuring method
GB/T 14039-2002 Hydraulic transmission oil solid particle pollution level code
GB 16710 earthmoving machinery noise limit
GB/T 18826 Industrial 1,1,1,2-tetrafluoroethane (HFC-134a)
GB/T 20082 Hydraulic fluid transmission liquid pollution method using optical microscope to measure particle contamination
GB .20178 Earth-moving machinery machine safety label general rules
GB 20891 Limits and measurement methods for emission of pollutants from diesel engines for non-road mobile machinery (China's third and fourth stages)
GB/T 21152 Performance requirements and test methods for earth-moving or high-speed rubber crawler type machine brake systems
GB/T 21154 earthmoving machinery machine and its working device and component quality measurement method
GB/T 21941 earthmoving machinery hydraulic excavator and backhoe loader bucket and grab bucket capacity calibration
GB/T 22358 Earthmoving machinery protection and storage
GB/T 25606 Earthmoving Machinery Product Identification Code System
GB/T 25614 Earthmoving machinery sound power level measurement under dynamic conditions
GB/T 25615 Earthmoving machinery driver position emission sound pressure level measurement under dynamic conditions
GB 25684.5 Earthmoving machinery - Part 5. Requirements for hydraulic excavators
GB/T 28239 Non-road diesel engine fuel consumption rate and oil consumption rate limit and test method
GB/T 36693 earthmoving machinery hydraulic excavator reliability test method, failure classification and assessment
JB/T 5946 General technical conditions for engineering machinery painting
JB/T 5947 General technical conditions for engineering machinery packaging
JB/T 9725 earthwork machinery product model preparation method
ISO 11500 hydraulic drive with extinction principle for automatic particle counting to determine the degree of particulate contamination of liquid samples (Hydraulic fluidpower-Determinationoftheparticulatecontaminationlevelofaliquidsamplebyautomaticpar-
Ticlecountingusingthelight-extinctionprinciple) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37904-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37904-2019
$295.00