Valid

GB/T 37893-2019Recommendation procedure specification for Laser-arc hybrid welding (English PDF)

激光-电弧复合焊接推荐工艺方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37893-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 30, 2019

Implementation date

March 1, 2020

Scope

GB/T 37893-2019 is the English-translated version of 激光-电弧复合焊接推荐工艺方法.

GB/T 37893-2019 is the Chinese standard "Recommendation procedure specification for Laser-arc hybrid welding". Its scope clause reads: This standard specifies the general process parameters and technical requirements for laser-arc hybrid welding.

This standard applies to laser hybrid welding of steel, aluminum and aluminum alloy. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 37893-2019

National Standard of the People's Republic of China

ICS
25.160.10
Classification
J 33

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Security protection
  • 5 Welding operator qualification
  • 6 laser hybrid welding equipment
  • 7 protective gas
  • 8 joint design and preparation
  • 9 wire selection
  • 10 Pre-weld preparation
  • 10.1 Pre-weld treatment
  • 10.2 Pairing and clamping of workpieces
  • 10.3 Device Status Check
  • 11 welding torch design
  • 12 Process Rating
  • 13 welding process parameters
  • 14 Welding quality inspection and acceptance
  • 15 Welding Rework
  • Appendix A (informative) High-strength steel laser hybrid welding process specification example
  • Appendix B (informative) Example 13 of aluminum alloy laser hybrid welding process specification

1 Scope

This standard specifies the general process parameters and technical requirements for laser-arc hybrid welding.

This standard applies to laser hybrid welding of steel, aluminum and aluminum alloy.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 985.1 Recommended groove for gas welding, electrode arc welding, gas shielded welding and high energy beam welding

GB/T 985.3 Recommended groove for aluminum and aluminum alloy gas shielded welding

GB/T 3323 metal fusion welding joints radiography

GB/T 3375 welding terminology

GB/T 3863 Industrial Oxygen

GB/T 4842 argon

GB/T 6052 industrial liquid carbon dioxide

GB 7247.1 Safety of laser products - Part 1. Equipment classification, requirements

GB/T 7247.4 Safety of laser products - Part 4. Laser screens

GB/T 7247.14 Safety of laser products - Part 14. User guide

GB/T 8110 carbon steel, low alloy steel welding wire for gas shielded arc welding

GB 9448 welding and cutting safety

GB/T 10858 aluminum and aluminum alloy welding wire

GB/T 11345 weld non-destructive testing ultrasonic testing technology, testing level and evaluation

GB/T 18851.1 Non-destructive testing - Penetration testing - Part 1. General

GB/T 19866 Welding procedure specification and general principles of assessment

GB/T 19867.6 Laser-arc hybrid welding process specification

GB/T 22087 Aluminium and aluminum alloy arc welding head lacking quality classification guide

GB/T 29713 stainless steel welding wire and welding tape

GB 30863 Personal protective equipment eye and face protection laser goggles

GB/T 32259 weld non-destructive testing fusion welding head visual inspection

GB/T 33214 Laser, Arc and Nickel Alloy Laser-Arc Composite Welded Joints

GB/T 33645 Laser-arc composite welding process qualification test of steel, nickel and nickel alloy

3 Terms and definitions

The terms and definitions defined in GB/T 3375 and GB/T 19866 apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37893-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37893-2019

$235.00