GB/T 37878-2019General technical specifications of energy consumption design for electrophones (English PDF)
电鸣乐器能耗设计通用技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37878-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37878-2019 is the English-translated version of 电鸣乐器能耗设计通用技术规范.
GB/T 37878-2019 is the Chinese standard "General technical specifications of energy consumption design for electrophones".
Its scope clause reads: This standard specifies the terms and definitions, classification, general principles, requirements, tests, and inspections of the energy consumption of the products and auxiliary equipment of the electronic musical instruments.
Inspection rules and energy consumption levels. This standard is applicable to products and auxiliary products of electroacoustic instruments that can work normally under the power supply of grid power (220V, 50Hz). device.
This standard does not apply to products and auxiliary equipment of electroacoustic instruments that are powered by batteries or network interfaces (such as USB interfaces).
This standard does not apply to products that display a category of electroacoustic instruments with a drive frequency greater than or equal to 1 GHz. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37878-2019
National Standard of the People's Republic of China
- ICS
- 97.200.20
- Classification
- Y 58
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroacoustic instrument
- 3.2 Auxiliary equipment
- 3.3 Liquid crystal display
- 3.4 Working mode onmode
- 3.5 Idle mode
1 Scope
This standard specifies the terms and definitions, classification, general principles, requirements, tests, and inspections of the energy consumption of the products and auxiliary equipment of the electronic musical instruments.
Inspection rules and energy consumption levels.
This standard is applicable to products and auxiliary products of electroacoustic instruments that can work normally under the power supply of grid power (220V, 50Hz).
device.
This standard does not apply to products and auxiliary equipment of electroacoustic instruments that are powered by batteries or network interfaces (such as USB interfaces).
This standard does not apply to products that display a category of electroacoustic instruments with a drive frequency greater than or equal to 1 GHz.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 20943-2013 Single output AC-DC and AC-AC external power supply energy efficiency limit value and energy saving evaluation value
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Electroacoustic instrument
An instrument that produces sound directly or indirectly through electricity.
[GB/T 23173-2008, definition 2.5]
3.2 Auxiliary equipment
A component or product that complements or refines the function of a musical instrument.
3.3 Liquid crystal display
Applied voltage to change the orientation of the liquid crystal molecules to force the light intensity of the liquid crystal layer to produce a grayscale or color image display device or
Component.
[GB/T 9002-2017, definition 9.5.11]
3.4 Working mode onmode
Boot mode
The products and auxiliary equipment of the electroacoustic instruments are connected to the power supply of the grid to provide various functional status.
3.5 Idle mode
The products and auxiliary equipment of the electroacoustic instruments are not performing the main functions and have no signal (audio, video) output in the working mode.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37878-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37878-2019
$145.00