GB/T 37809-2019General matching specification for fully-mechanized coal mining face in deeply inclined coal seam (English PDF)
大倾角综采工作面总体配套技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37809-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37809-2019 is the English-translated version of 大倾角综采工作面总体配套技术条件.
GB/T 37809-2019 sets the technical requirements and the supporting verification for the overall supporting of the large dip angle fully mechanized mining face, which the page also titles the general matching specification for a fully mechanized coal mining face in a deeply inclined coal seam.
Clause 1 states that the standard applies to the overall supporting of a large-angle coal seam fully mechanized mining face with a coal seam inclination angle above 25 degrees, and that it suits thin, medium thick and thick coal seam mining; no exclusion is written.
The draft printed on the page carries only clause 1, Scope, and clause 2, Normative references, and there is no contents list, so the titles of the later clauses cannot be given.
Clause 2 cites GB 18452, GB/T 24506, GB 25974.1, GB 50471, GB 50536, GB 50581, GB/T 37771-2019, AQ 1021 and a long run of MT and MT/T documents whose titles name drum shearers, scraper conveyors, belt conveyors, emulsion pump stations, chute crushers, hydraulic supports and mine cooling.
The foreword states that the standard is proposed and managed by the China Coal Industry Association. It was issued on 2019-08-30 and has applied since 2020-03-01.
Found what you need?
Document preview — GB/T 37809-2019
National Standard of the People's Republic of China
- ICS
- 73.100.01
- Classification
- D 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- Foreword
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard stipulates the technical requirements and supporting verification of the overall supporting working face of the large dip angle comprehensive mechanized mining face.
This standard is applicable to the overall supporting of large-angle coal seam fully mechanized mining face with coal seam inclination angle above 25°, suitable for thin and medium thick and thick coal seam mining.
(hereinafter referred to as the large dip angle fully mechanized mining support).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all modified versions) applies to this document.
GB 18452 Breaking equipment safety requirements
GB/T 24506 hydraulic bracket type, parameters and model preparation
GB 25974.1 Hydraulic support for coal mines - Part 1: General technical conditions
GB 50471 Coal Mine Gas Drainage Engineering Design Code
Design code for GB 50536 coal mine fully mechanized mining area
GB 50581 Coal Industry Mine Monitoring and Monitoring System Equipment Configuration Standard
GB/T 37771-2019 coal mine fully mechanized mining face overall supporting guidelines
AQ1021 High-pressure spray dust reduction technical specification for coal mining face
MT/T 81 drum shearer type inspection specification
MT/T 82 drum shearer factory inspection specification
MT/T 84 drum shearer type and basic parameters
MT/T 103 mining scraper conveyor factory inspection specification
General technical requirements for MT/T 105 scraper conveyor
MT/T 106 Slotted scraper transferer general technical conditions
MT/T 154.4 Coal Mine Belt Conveyor Model Preparation Method
MT/T 188.1 Emulsion pumping station for coal mines - Part 1: Pumping station
MT/T 188.2 Emulsion pump station for coal mine emulsion pump
MT/T 493 Chute crusher
MT/T 529 Coal Mine Telescopic Belt Conveyor Parameters
MT/T 555 large inclination hydraulic support technical conditions
MT/T 556 Hydraulic Support Design Specification
MT/T 815 top coal hydraulic support technical conditions
MT820 Technical requirements for belt conveyors for coal mines
MT/T 901 coal mine underground telescopic belt conveyor
MT/T 1136-2011 Mine cooling technical specification
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 18452Crusher equipment safety requirements
- GB/T 24506Type and specification and model number of powered support
- GB 25974.1Powered support for coal mine - Part 1: General technical specification
- GB 50471Coal Mine Gas Drainage Engineering Design Standard
- GB 50581Standard for allocated mine monitoring and controlling system of coal industry
- GB/T 37771-2019General matching guideline for fully-mechanized mining face
MT/T 81 · MT/T 82 · MT/T 103 · MT/T 106 · MT/T 188.2 · MT/T 493 · MT/T 529 · MT/T 555 · MT/T 556 · MT 820 · MT/T 901
Similar standards
How to Download GB/T 37809-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
AQ 1021-2006 — Technical specifications of high-pressure spraying for the working and heading face in mines
GB 18452-2001 — Crusher equipment safety requirements
GB 25974.1-2010 — Powered support for coal mine - Part 1: General technical specification
Secure payment via Stripe
Payments accepted
GB/T 37809-2019
$145.00