GB/T 37744-2019Meteorological grades of hot damage to rice (English PDF)
水稻热害气象等级
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37744-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37744-2019 is the English-translated version of 水稻热害气象等级.
GB/T 37744-2019 defines how the heat damage suffered by rice is graded for meteorological monitoring and assessment. It sets intensity, impact and damage grades, together with the formulas used to calculate each indicator and the thresholds for classifying them.
Intensity is measured at a single station and over a region using the accumulated heat above 35 °C during booting-flowering and grain filling, counted once high temperatures last three days or more, for single-season and early double-season rice; impact is assessed on the yield factors, and damage through the heat damage loss rate.
It is used by meteorological services and agricultural bodies to report and compare heat events. The standard was proposed by the China Meteorological Administration, issued on 4 June 2019 and has applied since 1 January 2020.
Found what you need?
Document preview — GB/T 37744-2019
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- A 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Terms and Definitions
- 3 Rice heat damage meteorological grade
- 3.1 Strength level
- 3.1.1 Single point thermal damage level
- 3.1.2 Regional heat damage intensity level
- 3.1.3 hazard factor strength level
- 3.2 Impact Level
- 3.2.1 Production factor impact level
- 3.2.2 Regional heat damage level
- 3.3 Damage Level
- 3.3.1 Calculation method of indicators
- 3.3.2 Classification
- Reference
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the intensity, impact, damage meteorological grade of the rice and its index calculation and classification methods.
This standard applies to rice heat hazard monitoring and assessment.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Rice heat hazard hotdamagetorice
Agro-meteorological disasters due to persistent high temperatures leading to loss of rice yield.
2.2 High temperature days
The maximum temperature in the rice growing season is greater than or equal to 35 °C.
2.3 Hazard heat accumulated temperature
When the number of consecutive high-temperature days (2.2) in the booting-flowering and filling stages of rice reaches 3 days and above, the daily maximum temperature is higher than 35 °C.
2.4 High temperature ripening
Due to the high temperature, the rice grain filling process is obviously shortened, the maturity period is advanced, and the grain weight is reduced.
2.5 Heat damage rate
The ratio of the decrease in the amount of rice yield factor per unit area caused by heat damage to the value of the highest potential yield factor.
2.6 Seed setting rate
The percentage of the number of grains in the rice paddy as a percentage of the total number of grains.
3 Rice heat damage meteorological grade
3.1 Strength level
3.1.1 Single point thermal intensity level
3.1.1.1 Calculation method of indicators
Single-point high-temperature heat damage intensity of rice (one-season rice, double-season early rice) at booting-flowering stage and filling stage, using hazard heat accumulated temperature as an indicator For the calculation method, see equations (1) and (2).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37744-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37744-2019
$145.00