GB/T 37693-2019Information technology—General architecture for industrial equipment inspection management system based on sensing device (English PDF)
信息技术 基于感知设备的工业设备点检管理系统总体架构
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37693-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37693-2019 is the English-translated version of 信息技术 基于感知设备的工业设备点检管理系统总体架构.
GB/T 37693-2019 is the Chinese standard "Information technology—General architecture for industrial equipment inspection management system based on sensing device".
Its scope clause reads: This standard specifies the overall architecture of the industrial equipment inspection management system based on the sensing device, and gives the industrial equipment based on the sensing equipment.
Checking workflow, based on the device-based industrial equipment inspection management system including sensing devices, routers, gateways, inspection management and data Service platform and other parts.
This standard applies to the design, development, integration and application of industrial equipment inspection management systems based on sensing equipment. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37693-2019
National Standard of the People's Republic of China
- ICS
- 35.110
- Classification
- L 79
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Perceptual device-based industrial equipment inspection management system overall architecture
- 4.1 Overview
- 4.2 Perceptual device
- 4.3 Router
- 4.4 Gateway
- 4.5 Inspection Management and Data Service Platform
- 4.6 Inspector
- Appendix A (informative) Industrial equipment inspection workflow based on sensing equipment
1 Scope
This standard specifies the overall architecture of the industrial equipment inspection management system based on the sensing device, and gives the industrial equipment based on the sensing equipment.
Checking workflow, based on the device-based industrial equipment inspection management system including sensing devices, routers, gateways, inspection management and data
Service platform and other parts.
This standard applies to the design, development, integration and application of industrial equipment inspection management systems based on sensing equipment.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 30269.2-2013 Information technology sensor networks - Part 2. Terminology
3 Terms and definitions
The following terms and definitions as defined in GB/T 30269.2-2013 apply to this document.
3.1 Check inspection
In industrial production, according to certain requirements, cycles, and plans, the inspectors shall inspect the relevant equipment and parts, and record the corresponding equipment.
Number and data, determine the operating status and usage of the equipment, find hidden dangers of equipment failure, repair and maintain in time, and ensure the normal production process
The device management method that is running.
3.2 Sensing device
A device that can acquire object information.
3.3 Inspection management system
Using wireless sensor network, radio frequency identification, intelligent sensing, security management and other technologies, on-site equipment inspection and collection by inspectors
Data preparation, automatic data collection, data uploading, inspection management and data services, to achieve intelligent inspection of industrial equipment
Information system.
4 Perceptual device-based industrial equipment inspection management system overall architecture
4.1 Overview
Sensor-based industrial equipment inspection management system generally consists of sensing equipment, routers, gateways, inspection management and data service platforms.
Composition, as shown in Figure 1. An industrial device may have one or more parts to be inspected, and a device inspection part label is used to identify one
The equipment inspection site; according to the actual inspection requirements, one device inspection site can install one or more sensor nodes.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37693-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37693-2019
$145.00