GB/T 37640-2019Determination of chloroacetaldehyde,2,4-dihydroxy-3-methylbenzaldehyde,crotonaldehyde,acetophenone,2-pentylidenecyclohexanone and glutaral in cosmetics—High performance liquid chromatography (English PDF)
化妆品中氯乙醛、2,4-二羟基-3-甲基苯甲醛、巴豆醛、苯乙酮、2-亚戊基环己酮、戊二醛含量的测定 高效液相色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37640-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37640-2019 is the English-translated version of 化妆品中氯乙醛、2,4-二羟基-3-甲基苯甲醛、巴豆醛、苯乙酮、2-亚戊基环己酮、戊二醛含量的测定 高效液相色谱法.
GB/T 37640-2019 is the Chinese standard "Determination of chloroacetaldehyde,2,4-dihydroxy-3-methylbenzaldehyde,crotonaldehyde,acetophenone,2-pentylidenecyclohexanone and glutaral in cosmetics—High performance liquid chromatography".
Its scope clause reads: This standard specifies chloroacetaldehyde, 2,4-dihydroxy-3-methylbenzaldehyde, crotonaldehyde, acetophenone, 2-pentylenecyclohexanone and pentane in cosmetics.
Principles, reagents and materials, equipment, test procedures, calculation of results, recovery and precision of aldehydes for high performance liquid chromatography Poor content.
This standard applies to water, cream, lotion, powder and wax-based cosmetics in chloroacetaldehyde, 2,4-dihydroxy-3-methylbenzaldehyde, Pakistan Determination of soybean aldehyde, acetophenone, 2-pentylene cyclohexanone and glutaraldehyde.
The detection limits and limits of quantitation of this standard. chloroacetaldehyde, 2,4-dihydroxy-3-methylbenzaldehyde, acetophenone, 2-pentylenecyclohexanone and pentane The detection limit of aldehyde method was 1.0mg/kg, the limit of quantification was 3.0mg/kg; the detection limit of crotonaldehyde was 0.5mg/kg, the limit of quantification was. Its clauses include principle; reagents and materials.
Found what you need?
Document preview — GB/T 37640-2019
National Standard of the People's Republic of China
- ICS
- 71.100.70
- Classification
- Y 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 reagents and materials
1 Scope
This standard specifies chloroacetaldehyde, 2,4-dihydroxy-3-methylbenzaldehyde, crotonaldehyde, acetophenone, 2-pentylenecyclohexanone and pentane in cosmetics.
Principles, reagents and materials, equipment, test procedures, calculation of results, recovery and precision of aldehydes for high performance liquid chromatography
Poor content.
This standard applies to water, cream, lotion, powder and wax-based cosmetics in chloroacetaldehyde, 2,4-dihydroxy-3-methylbenzaldehyde, Pakistan
Determination of soybean aldehyde, acetophenone, 2-pentylene cyclohexanone and glutaraldehyde.
The detection limits and limits of quantitation of this standard. chloroacetaldehyde, 2,4-dihydroxy-3-methylbenzaldehyde, acetophenone, 2-pentylenecyclohexanone and pentane
The detection limit of aldehyde method was 1.0mg/kg, the limit of quantification was 3.0mg/kg; the detection limit of crotonaldehyde was 0.5mg/kg, the limit of quantification was
1.5
mg/kg.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 Analytical laboratory water specifications and test methods
3 Principle
Water, cream, lotion and powder cosmetic samples are directly extracted with 50% (volume fraction) acetonitrile solution; wax-based cosmetic samples
Disperse with n-hexane and extract with 50% (volume fraction) acetonitrile solution; the extract is centrifuged, filtered, and determined by high performance liquid chromatography.
(wherein chloroacetaldehyde and glutaraldehyde are determined by high performance liquid chromatography after being derivatized with 2,4-dinitrophenylhydrazine). According to retention time and light
Spectral qualitative, external standard method quantitative. If necessary, confirm by high performance liquid chromatography-mass spectrometry/mass spectrometry.
4 reagents and materials
Unless otherwise stated, the reagents used were of analytical grade and the water was the first grade water specified in GB/T 6682.
4.1 Acetonitrile
Chromatographically pure.
4.2 Hexane
Chromatographically pure.
4.3
Sodium dihydrogen phosphate (NaH2PO4·2H2O).
4.4
Phosphoric acid.
4.7 Buffer solution
Accurately weigh 15.6 g of sodium dihydrogen phosphate (4.3), dissolve in water and dilute to 1 L, and adjust the pH to 2.0 with phosphoric acid (4.4).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37640-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37640-2019
$205.00