GB/T 37628-2019Determination of astragaloside, paeoniflorin, forsythin and forsythoside A in cosmetics—High performance liquid chromatography (English PDF)
化妆品中黄芪甲苷、芍药苷、连翘苷和连翘酯苷A的测定 高效液相色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37628-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37628-2019 is the English-translated version of 化妆品中黄芪甲苷、芍药苷、连翘苷和连翘酯苷A的测定 高效液相色谱法.
GB/T 37628-2019 is the Chinese standard "Determination of astragaloside, paeoniflorin, forsythin and forsythoside A in cosmetics—High performance liquid chromatography".
Its scope clause reads: This standard specifies the qualitative and quantitative HPLC method for the content of astragaloside, paeoniflorin, forsythin and forsythiaside A in cosmetics.
The principle, equipment and materials of the detection method, analysis steps, calculation of results, recovery and precision, allowable difference, etc. This standard applies to the determination of the content of astragaloside, paeoniflorin, forsythin and forsythiaside A in water, emulsion and cream.
The detection limit of this standard method for astragaloside IV is 15mg/kg, the limit of quantification is 45mg/kg; the detection limit of paeoniflorin is 3mg/kg, The limit is 8 mg/kg; the detection limit of forsythin and forsythiaside A is 20 mg/kg, and the limit of quantification is 60 mg/kg. Its clauses include astragaloside iv.
Found what you need?
Document preview — GB/T 37628-2019
National Standard of the People's Republic of China
- ICS
- 71.100.70
- Classification
- Y 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 astragaloside IV
- 3.1 Principle
- 3.2 Reagents and materials
1 Scope
This standard specifies the qualitative and quantitative HPLC method for the content of astragaloside, paeoniflorin, forsythin and forsythiaside A in cosmetics.
The principle, equipment and materials of the detection method, analysis steps, calculation of results, recovery and precision, allowable difference, etc.
This standard applies to the determination of the content of astragaloside, paeoniflorin, forsythin and forsythiaside A in water, emulsion and cream.
The detection limit of this standard method for astragaloside IV is 15mg/kg, the limit of quantification is 45mg/kg; the detection limit of paeoniflorin is 3mg/kg,
The limit is 8 mg/kg; the detection limit of forsythin and forsythiaside A is 20 mg/kg, and the limit of quantification is 60 mg/kg.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 Analytical laboratory water specifications and test methods
3 astragaloside IV
3.1 Principle
Astragaloside is dissolved in hot water and then extracted with water-saturated n-butanol, washed with ammonia solution, purified by C18 solid phase extraction column, high performance liquid chromatography
Separation, evaporative light scattering detector measurement, external standard method for quantification.
3.2 Reagents and materials
Unless otherwise specified, the reagents used are chromatographically pure, and the water is the first grade water specified in GB/T 6682.
3.2.1
Methanol.
3.2.3 n-butanol
analytically pure.
3.2.4
Acetonitrile.
3.2.5
Ammonia.
3.2.6 Ammonia test solution
Take 400 mL of ammonia water (3.2.5) and dilute to 1 L with deionized water.
3.2.7 Astragaloside standard substance
purity is not less than 96%. Chinese and English name, CAS number, molecular formula and relative molecular mass of astragaloside
See Table A.1 in Appendix A for the structural formula.
3.2.8 Standard working solution of astragaloside
accurately weigh 100mg of astragaloside standard substance (3.2.7) (accurate to 0.1mg)
In a 100mL volumetric flask, dilute to the mark with methanol, prepare a standard stock solution of astragaloside IV at a concentration of 1000mg/L, and avoid it at 4°C.
Light preservation, valid for 2 months. Accurately transfer 2 mL, 3 mL, 4 mL, 5 mL, 10 mL, 50 mL of the standard stock solution of Astragaloside
After 100 mL of the brown volumetric flask, the volume was adjusted to the mark with methanol, and the mass concentrations were 20 mg/L, 30 mg/L, and 40 mg/L, respectively.
50mg/L, 100mg/L, 500mg/L of the standard working solution of astragaloside, stored at 4 ° C in the dark, can be used for one week.
3.2.9
C18 solid phase extraction column..200 mg, 3 mL.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37628-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37628-2019
$205.00