Valid

GB/T 37520-2019Titanium alloy extrusion profiles for aviation (English PDF)

航空用钛合金挤压型材

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37520-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 4, 2019

Implementation date

May 1, 2020

Scope

GB/T 37520-2019 is the English-translated version of 航空用钛合金挤压型材.

GB/T 37520-2019 is the Chinese standard "Titanium Alloy Extrusion Profiles for Aviation". Its scope clause reads: This Standard stipulates the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and order form (or contract) content of titanium alloy extrusion profiles for aviation.

This Standard is applicable to titanium alloy profiles which are manufactured through the method of extrusion (hereinafter referred to as profiles). Its clauses include technical requirements; test methods; inspection rules; order form (or contract) content; marking, packaging, transportation, storage and.

It was issued by the State Administration for Market Regulation on JUNE 4, 2019 and took effect on MAY 1, 2020.

Found what you need?

Document preview — GB/T 37520-2019

National Standard of the People's Republic of China

ICS: 77.150.50
Classification: H 64

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword3
1 Scope4
2 Normative References4
3 Technical Requirements4
4 Test Methods10
5 Inspection Rules10
6 Marking, Packaging, Transportation, Storage and Quality Certificate12
7 Order Form (or contract) Content13

1 Scope

This Standard stipulates the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and order form (or contract) content of titanium alloy extrusion profiles for aviation.

This Standard is applicable to titanium alloy profiles which are manufactured through the method of extrusion (hereinafter referred to as profiles).

2 Normative References

The following documents are indispensable to the application of this document. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document.

GB/T 228.1 Metallic Materials - Tensile Testing - Part 1: Method of Test at Room Temperature;

GB/T 3620.1 Designation and Composition of Titanium and Titanium Alloys;

GB/T 3620.2 Titanium and Titanium Alloys - Permissible Variations of Chemical Composition for Wrought Product Analysis;

GB/T 4698 (all parts) Methods for Chemical Analysis of Titanium Sponge, Titanium and Titanium Alloys;

GB/T 5168 Microstructure and Macrostructure Examination for alpha-beta Titanium Alloys;

GB/T 8180-2007 Wrought Titanium and Titanium Alloy Products - Packing, Marking, Transporting and Storing;

GB/T 23603 Test Method of Titanium and Titanium Alloy Surface Contamination Layer.

3 Technical Requirements

3.9.1 The surface of profiles shall be clean; there shall be no cracks, folds, peeling, pinholes, oxidized color, metallic or non-metallic inclusions.

3.9.2 The surface of profiles allows the existence of slight defects that are not more than 0.1 mm, such as scratches, extrusion marks, pitting and wrinkles. However, the allowed minimum dimension shall be guaranteed.

3.9.3 It is allowed to eliminate partial defects on profiles. However, after the elimination, the allowed minimum dimension of profiles shall be guaranteed. The ratio of the depth and breadth of such elimination shall be not more than 1:6.

3.1 Materials

3.1.1 Ingots for the manufacture of profiles shall go through at least two times of smelting. The first time of smelting may adopt vacuum consumable electric-arc furnace or cold-hearth furnace for smelting. The subsequent smelting shall adopt vacuum consumable electric-arc furnace for smelting. Furthermore, the last time of smelting

4 Test Methods

4.1 Chemical composition shall be tested in accordance with GB/T 4698.

4.2 Dimensions and allowable deviations shall be tested through measuring instruments of corresponding accuracy.

4.3 Room-temperature tensile properties shall be tested in accordance with GB/T 228.1.

4.4 Macrostructure shall be tested in accordance with GB/T 5168.

4.5 Microstructure shall be tested under 200 times in accordance with GB/T 5168.

4.6 Surface contamination shall be tested under 100 times in accordance with GB/T 23603.

4.7 Surface quality shall be tested through visual inspection, or through measuring instruments of corresponding accuracy.

5 Inspection Rules

5.4.3 When the inspection result of dimensions, allowable deviations and surface quality is disqualified, then, that product shall be determined as disqualified.

5.1 Inspection and Acceptance Inspection

5.1.1 Products shall be inspected by the supply-side, which shall guarantee that product quality complies with the stipulations of this Standard and the order form (or contract). In addition, a quality certificate shall be filled out.

5.1.2 The demand-side shall inspect the received products in accordance with the stipulations of this Standard and the order form (or contract). If the inspection result does not comply with the stipulations of this Standard and the order form (or contract), the demand-side shall propose this to the supply-side within 3 months, starting from the date of receiving the products. This shall be settled by the demand-side and the supply-side through negotiation.

6 Marking, Packaging, Transportation, Storage and Quality Certificate

6.1 Product Marking

On products that are qualified in the inspection, the following marking (or label) shall be made:

a) Designation;

b) Specification;

c) Status;

d) Batch No.;

e) Serial No. of this Standard.

6.2 Packaging, Marking, Transportation and Storage Products'

packaging, marking, transportation and storage shall comply with the stipulations of pipes in GB/T 8180-2007.

6.3 Quality Certificate

Each batch of products shall be attached with a quality certificate, which indicates:

a) The supply-side's name;

b) Product's name;

c) Product's designation, specification and status;

d) Smelting furnace No., batch No., batch weight and quantity;

e) Various analysis and inspection results, and the quality inspection department's inspection stamp;

f) Serial No. of this Standard;

g) Date of packaging. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 4698

Similar standards

GB/T 14845-2026|GB/T 20927-2026|GB/T 35364-2026|GB/T 35368-2026|GB/T 12769-2025|GB/T 26723-2025

How to Download GB/T 37520-2019

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.