GB/T 37498-2026Rubber, raw natural - Determination of the gel content of technically specified rubber (TSR) (English PDF)
天然生胶 技术分级橡胶(TSR)凝胶含量的测定
Also coversGB/T37498-2026 + GBT37498-2026
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37498-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 30, 2026
Implementation date
February 1, 2027
Scope
GB/T 37498-2026 is the English-translated version of 天然生胶 技术分级橡胶(TSR)凝胶含量的测定.
Determination of the gel content of technically specified rubber (TSR), a grade of raw natural rubber, is covered by this recommended national standard. Gel content is a quality characteristic of natural rubber that affects processing and performance, so producers, traders, tyre and rubber goods manufacturers and testing laboratories use the method to check material against agreed grade requirements. It adopts an international standard.
It replaces GB/T 37498-2019, so laboratories whose procedures cite the earlier edition should update them.
As a GB/T document it is recommended rather than mandatory in China, though supply contracts for natural rubber commonly refer to test methods of this kind so that results can be compared between parties. It was issued on 30 July 2026 under the responsibility of the China Petroleum and Chemical Industry Federation and takes effect on 1 February 2027.
Found what you need?
Document preview — GB/T 37498-2026
National Standard of the People's Republic of China
- ICS
- 83.040.10
- Classification
- B72
- Replacing
- GB/T 37498-2019
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
GB/T 37498-2026 is a recommended national standard (GB/T) of the People's Republic of China, issued on 30 July 2026 by the State Administration for Market Regulation and the Standardization Administration of China, with effect from 1 February 2027.
This edition replaces GB/T 37498-2019.
The document adopts an international standard (ISO or IEC).
It is under the responsibility of the China Petroleum and Chemical Industry Federation.
Classification: ICS 83.040.10; CCS B72.
1 Scope
Determination of the gel content of technically specified rubber (TSR), a grade of raw natural rubber, is covered by this recommended national standard. Gel content is a quality characteristic of natural rubber that affects processing and performance, so producers, traders, tyre and rubber goods manufacturers and testing laboratories use the method to check material against agreed grade requirements. It adopts an international standard.
It replaces GB/T 37498-2019, so laboratories whose procedures cite the earlier edition should update them.
As a GB/T document it is recommended rather than mandatory in China, though supply contracts for natural rubber commonly refer to test methods of this kind so that results can be compared between parties. It was issued on 30 July 2026 under the responsibility of the China Petroleum and Chemical Industry Federation and takes effect on 1 February 2027.
Remaining clauses in the full document
- 2 Normative references
- 3 Terms and definitions
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of GB/T 37498
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 37498-2026 | Rubber, raw natural - Determination of the gel content of technically specified rubber (TSR) | current edition | Current |
| GB/T 37498-2019 | Rubber,raw natural - Determination of the gel content of technically specified rubber (TSR) | previous edition | In force until 1 February 2027 |
This page sells the current edition, GB/T 37498-2026. Earlier editions are listed for reference only.
How to Download GB/T 37498-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 37498-2026
$150.00