GB/T 37466-2019Laser lift-off equipment used for GaN (English PDF)
氮化镓激光剥离设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37466-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
October 1, 2019
Scope
GB/T 37466-2019 is the English-translated version of 氮化镓激光剥离设备.
GB/T 37466-2019 is the Chinese standard "Laser lift-off equipment used for GaN". Its scope clause reads: This standard specifies the product classification and marking, working conditions, and requirements for GaN laser stripping equipment (hereinafter referred to as "laser stripping equipment").
Requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to equipment for stripping gallium nitride (GaN)-based epitaxial layers grown by sapphire substrates by laser method, aluminum nitride Laser stripping equipment can refer to this standard. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37466-2019
National Standard of the People's Republic of China
- ICS
- 31.550
- Classification
- L 95
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Product Classification and Marking
- 4.1 Classification
- 4.2 Model Mark
- 5 working conditions
- 5.1 Power supply
- 5.2 Ambient temperature
- 5.3 Relative humidity
- 5.4 Atmospheric pressure
- 5.5 Clean room level
- 5.6 Electromagnetic interference
- 5.7 Ground vibration requirements
- 6 Requirements
- 6.1 Appearance
- 6.2 Laser requirements
- 6.3 Scan Station
- 6.4 Machine Performance
- 6.5 Electrical requirements
- 6.6 Control device
- 6.7 Software Requirements
- 6.8 Electromagnetic compatibility
- 6.9 Noise
- 6.10 Mean Time Between Failures
- 6.11 Security Requirements
- 7 Detection method
- 7.1 Visual inspection
- 7.2 Laser inspection
- 7.3 Scanning Station Inspection
- 7.4 Machine performance test
- 7.5 Electrical inspection
- 7.6 Control device inspection
- 7.7 Software Detection
- 7.8 Electromagnetic compatibility test
- 7.9 Noise Test
- 7.10 Mean Time Between Failures Verification
- 7.11 Safety Requirements Check
- 8 Inspection rules
- 8.1 Inspection classification
- 8.2 Identification test
- 8.3 Factory inspection
- 8.4 Decision Rule
- 9 Marking, packaging, transport and storage
- 9.1 Mark
- 9.2 Packing
- 9.3 Transportation
- 9.4 Storage
1 Scope
This standard specifies the product classification and marking, working conditions, and requirements for GaN laser stripping equipment (hereinafter referred to as "laser stripping equipment").
Requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to equipment for stripping gallium nitride (GaN)-based epitaxial layers grown by sapphire substrates by laser method, aluminum nitride
Laser stripping equipment can refer to this standard.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB 2893-2008 security color
GB 2894-2008 Safety signs and guidelines for their use
GB/T 3768-2017 Acoustic sound pressure method for the determination of noise source sound power level and sound energy level using the envelope measurement surface above the reflective surface
Simple method
GB/T 4208-2017 enclosure protection grade (IP code)
GB 4824-2013 Industrial, scientific and medical (ISM) radio frequency equipment disturbance characteristics limits and methods of measurement
GB/T 4942.1-2006 Degree of protection (IP code) for the overall structure of rotating electrical machines - Grading
GB/T 5080.7-1986 Equipment reliability test Verification test for failure rate and mean time between failures under the assumption of constant failure rate
Inspection plan
GB/T 5171.1-2014 Low-power motors - Part 1. General technical conditions
GB 5226.1-2008 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions
GB/T 6388 transport packaging receipt and delivery mark
GB 7247.1-2012 Safety of laser products - Part 1. Equipment classification, requirements
GB/T 7251.1-2013 Low-voltage switchgear and control equipment - Part 1. General
GB/T 9969 General guidelines for the use of industrial products
GB/T 14436 General Rules for Industrial Product Assurance Documents
GB/T 15706-2012 Mechanical Safety Design General Risk Assessment and Risk Reduction
GB/T 18268.1-2010 Electromagnetic compatibility requirements for electrical equipment - Part 1 . General requirements
GB/T 18490.1-2017 Mechanical safety laser processing machines - Part 1. General safety requirements
GB 50073-2013 clean factory design specification
GB/T 50087-2013 Industrial Enterprise Noise Control Design Specification
SJ/T 37-1996 Modeling and naming methods for special equipment for the electronics industry
3 Terms and definitions
The following terms and definitions as defined in GB/T 15706-2012 and GB 7247.1-2012 apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37466-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37466-2019
$235.00