GB/T 37319-2019Energy-saving power supply equipment with inverter for lift (English PDF)
电梯节能逆变电源装置
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37319-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 25, 2019
Implementation date
October 1, 2019
Scope
GB/T 37319-2019 is the English-translated version of 电梯节能逆变电源装置.
GB/T 37319-2019 is the Chinese standard "Energy-saving power supply equipment with inverter for lift".
Its scope clause reads: This standard specifies the terms and definitions of elevator energy-saving inverter power supply devices, model specifications and basic parameters, technical requirements, test methods, inspection Inspection rules, as well as marking, packaging, transportation and storage.
This standard applies to elevator energy-saving inverter power supply devices (hereinafter referred to as power supply devices). This standard does not apply to the power supply unit of the elevator energy-saving inverter feedback grid. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37319-2019
National Standard of the People's Republic of China
- ICS
- 29.200
- Classification
- K 46
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Model specifications and basic parameters
- 4.1 Model Specifications
- 4.2 Basic parameters
- 5 Technical requirements
- 5.1 Environmental conditions
- 5.2 Mains input voltage and frequency
- 5.3 Output voltage and frequency in mains operation mode
- 5.4 Energy storage inverter operation mode and energy storage inverter operation time
- 5.5 Emergency Inverter Operation Mode
- 5.6 Automatic switching function
- 5.7 Protection function
- 5.8 shows
- 5.9 Comprehensive power saving rate
- 5.10 Efficiency
- 5.11 Noise
- 5.12 Security Requirements
- 5.13 Electromagnetic Compatibility
- 5.14 Appearance and Structure
- 6 Test method
- 6.1 Test conditions
- 6.2 Mains input voltage and frequency test
- 6.3 Output voltage and frequency test during mains operation mode
- 6.4 Energy storage inverter operation mode and energy storage inverter operation time test
- 6.5 Emergency Inverter Operation Test
- 6.6 Automatic switching function test
- 6.7 Protection function test
- 6.8 Display Function Check
- 6.9 Comprehensive power saving rate test
- 6.10 Efficiency measurement
- 6.11 Noise Measurement
- 6.12 Safety test
- 6.13 Electromagnetic Compatibility Test
- 6.14 Appearance and structure inspection
- 7 Inspection rules
- 7.1 Test item
- 7.2 Type test
- 7.3 Factory test
- 8 Marking, packaging, transportation and storage
- 8.1 Mark
- 8.2 Packing
- 8.3 Transportation
- 8.4 Storage
1 Scope
This standard specifies the terms and definitions of elevator energy-saving inverter power supply devices, model specifications and basic parameters, technical requirements, test methods, inspection
Inspection rules, as well as marking, packaging, transportation and storage.
This standard applies to elevator energy-saving inverter power supply devices (hereinafter referred to as power supply devices).
This standard does not apply to the power supply unit of the elevator energy-saving inverter feedback grid.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB/T 2900.33 Electrotechnical terminology power electronics technology
GB/T 3859.1 General requirements for semiconductor converters and Grid-converters - Part 1-1. Basic requirements
GB/T 3859.2 General requirements for semiconductor converters and grid converters - Part 1-2. Application guidelines
GB/T 4208 enclosure protection grade (IP code)
GB/T 7024-2008 Elevator, escalator, moving walkway terminology
GB/T 7251.1-2013 Low-voltage switchgear and control equipment - Part 1. General
GB 7588 Elevator Manufacturing and Installation Safety Specification
GB/T 10058-2009 Elevator technical conditions
GB/T 13422-2013 Semiconductor converter electrical test method
GB/T 14048.1-2012 Low-voltage switchgear and control equipment - Part 1. General
GB/T 21225-2007 Inverter emergency power supply
3 Terms and definitions
GB/T 2900.33, GB/T 3859.1, GB/T 3859.2, GB/T 7024-2008, GB 7588 and GB/T 21225-2007
The following terms and definitions apply to this document. For ease of use, some of the GB/T 7024-2008 are listed below.
Terms and definitions.
3.1
The regenerative electric energy generated by the elevator operation is recovered and stored, and the stored electric energy is inverted into a three-phase power frequency sine wave alternating current that meets the requirements.
A matching device for powering the elevator.
Note. The power supply unit can not only reduce the mains consumption (energy saving) of the elevator, but also ensure that the elevator continues to operate safely after the mains supply is interrupted or failed.
3.2 Elevator lift
Serving a number of specific floors within a building, the car operating in at least two columns perpendicular to the horizontal plane or at an oblique angle to the lead line is less than
Permanent transport equipment for 15° rigid orbital motion.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37319-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37319-2019
$295.00