GB/T 37318-2019Power harmonic filter on marine (English PDF)
船舶电力谐波滤波器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37318-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 25, 2019
Implementation date
October 1, 2019
Scope
GB/T 37318-2019 is the English-translated version of 船舶电力谐波滤波器.
GB/T 37318-2019 is the Chinese standard "Power harmonic filter on marine". Its scope clause reads: This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements of ship power harmonic filters.
This standard is applicable to ship active power harmonic filtering with working frequency of 50Hz, 60Hz and rated working voltage not exceeding 1000V. (hereinafter referred to as the filter). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 37318-2019
National Standard of the People's Republic of China
- ICS
- 47.020.60
- Classification
- U 61
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Active power harmonic filter
- 3.2 Single current harmonic compensation rate
- 3.3 Single-voltage harmonic compensation rate
1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements of ship power harmonic filters.
This standard is applicable to ship active power harmonic filtering with working frequency of 50Hz, 60Hz and rated working voltage not exceeding 1000V.
(hereinafter referred to as the filter).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2900.1-2008 basic terminology of electrical terminology
GB/T 2900.33-2004 Electrotechnical terminology power electronics technology
GB/T 3859.1-2013 General requirements for semiconductor converters and power transformers - Part 1-1. Basic requirements
GB/T 4208-2017 enclosure protection grade (IP code)
GB/T 4365-2003 Electrotechnical terminology electromagnetic compatibility
GB/T 13384-2008 General technical conditions for mechanical and electrical product packaging
GD22-2015 Type Guide for Electrical and Electronic Product Type Approval Test
3 Terms and definitions
GB/T 2900.1-2008, GB/T 2900.33-2004, GB/T 4365-2003 and the following terms and definitions apply to
This document.
3.1 Active power harmonic filter
A converter device that implements a filtering function by generating harmonics and real-time offset of the grid harmonics.
3.2 Single current harmonic compensation rate
For the parallel filter, the difference between the root mean square value of the hth harmonic current before and after compensation and the mean square of the hth harmonic current generated by the harmonic source
The ratio of the root values (expressed as a percentage).
See formula (1).
Kh=
Inh-Ih
Inh
÷×100%= 1-
Ih
Inh
÷×100% (1)
In the formula.
Ih --- After the filter works, the rms harmonic current content of the grid side is the root mean square value, the unit is Am (A);
Before the Inh--filter works, the root mean square value of the hth harmonic current content of the harmonic source injected into the grid side is in Amperes (A).
3.3 Single-voltage harmonic compensation rate
For the series filter, the difference between the root mean square value of the hth harmonic voltage before and after compensation and the root mean square value of the hth harmonic voltage on the input side […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37318-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37318-2019
$205.00