GB/T 37159.2-2019Petroleum drilling and production equipment—Offshore self-elevating drilling unit—Part 2:Construction installation and commissioning acceptance (English PDF)
石油天然气钻采设备 海洋石油自升式钻井平台 第2部分:建造安装与调试验收
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37159.2-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 25, 2019
Implementation date
October 1, 2019
Scope
GB/T 37159.2-2019 is the English-translated version of 石油天然气钻采设备 海洋石油自升式钻井平台 第2部分:建造安装与调试验收.
GB/T 37159.2-2019 is the Chinese standard "Petroleum drilling and production equipment—Offshore self-elevating drilling unit—Part 2:Construction installation and commissioning acceptance".
Its scope clause reads: This part of GB/T 37159 specifies the construction and equipment installation and commissioning of offshore oil jack-up drilling platforms (hereinafter referred to as “platforms”).
Method, acceptance criteria. This section applies to the construction and installation, commissioning and acceptance of offshore oil jack-up drilling platforms.
Found what you need?
Document preview — GB/T 37159.2-2019
National Standard of the People's Republic of China
- ICS
- 75.180.10
- Classification
- E 92
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and abbreviations
- 4 Construction and installation
- 4.1 General requirements
- 4.2 Structural Construction
- 4.3 Power and Power System Installation
- 4.4 Drilling System Installation
- 4.5 Deck and auxiliary machinery
- 4.6 Safety, lifesaving and environmental protection
- 4.7 Living Facilities Installation Requirements
- 4.8 Piping System
- 4.9 Cable System
- 4.10 Weight Monitoring
- 5 Commissioning and acceptance
- 5.1 General
- 5.2 Large-scale test
- 5.3 Power and Electrical Systems
- 5.4 Drilling System
- 5.5 Deck and auxiliary machinery
- 5.6 Safety, lifesaving and environmental protection
- 5.7 Living facilities
- 5.8 Piping system
- 5.9 Acceptance
- Appendix A (informative) Debugging Safety Risk Analysis Sheet
- Appendix B (informative) Completion Acceptance Documents and Records
1 Scope
This part of GB/T 37159 specifies the construction and equipment installation and commissioning of offshore oil jack-up drilling platforms (hereinafter referred to as “platforms”).
Method, acceptance criteria.
This section applies to the construction and installation, commissioning and acceptance of offshore oil jack-up drilling platforms.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2820.4 Reciprocating internal combustion engine driven alternators - Part 4. Controls and switchgear
GB/T 3836.15 Explosive atmosphere - Part 15. Design, selection and installation of electrical installations
GB/T 4025 Human Machine Interface Marker Identification Basic and Safety Rule Indicators and Encoding Rules for Operating Devices
GB 4053 (all parts) Fixed steel ladders and platform safety requirements
GB 5749 Sanitary Standard for Drinking Water
GB/T 20660 Fire and Explosion Control, Reduction Measures and Guidelines for Offshore Production Facilities in the Oil and Gas Industry
GB/T 31032 Steel Pipe Welding and Acceptance
GB/T 32338 oil and gas industry drilling and workover equipment drilling pump
GB/T 34000 China Shipbuilding Quality Standard
GB 50235 industrial metal pipeline engineering construction specification
CB/T 3035 ship tilt test
CB/T 3728 steel small hatch cover
CB/T 3790 ship pipe processing technical conditions
CB/T 4403 self-elevating platform truss leg construction requirements
SY/T 5612 Oil Drilling Fluid Solid Phase Control Equipment Specification
SY/T 6564 Safety procedures for offshore petroleum operations
SY/T 6868 Anti-spray equipment system for drilling operations
SY/T 6962 offshore drilling unit well control system configuration and installation requirements
SY/T 10010 Electrical system design for fixed and floating offshore oil facilities in non-classified areas and Class I, Division 1 and Category 2 areas
Recommended practices for installation
Technical Regulations for Legal Inspection of Maritime Mobile Platforms of the Maritime Safety Administration of the People's Republic
China Classification Society Materials and Welding Specifications
China Classification Society maritime mobile platform classification specification
ISO 8501-1 - Determination of surface cleanliness of steel substrates - Part 1 . Uncoated steel […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37159.2-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 37159.3-2018 — Petroleum drilling and production equipment—Offshore self-elevating drilling unit—Part 3:Operation and surveys
GB/T 37159.1-2018 — Petroleum drilling and production equipment—Offshore self-elevating drilling unit—Part 1:Functional configuration and design requirements
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 37159.2-2019
$535.00