GB/T 37036.7-2023Information technology—Biometrics used with mobile devices—Part 7:multi-modal (English PDF)
信息技术 移动设备生物特征识别 第7部分:多模态
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37036.7-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 17, 2023
Implementation date
October 1, 2023
Scope
GB/T 37036.7-2023 is the English-translated version of 信息技术 移动设备生物特征识别 第7部分:多模态.
GB/T 37036.7-2023 is Part 7 of GB/T 37036 and covers multi-modal biometric recognition on mobile devices. It sets the overall framework, with the fusion levels and the technical architecture, and describes the business process for each of them: sample-level, feature-level, score-level and decision-level fusion.
It then gives the functional requirements for the multi-modal feature collection, storage and comparison modules, the requirements on registration failure rate and recognition response time, and the security requirements for collecting, storing and using multi-modal information.
It applies to the design, development, production, testing and use of multi-modal recognition systems on mobile devices. It cites the earlier parts of GB/T 37036 for the single modalities and GB/T 40660-2021 for the protection of biometric information. It was issued on 17 March 2023 and has applied since 1 October 2023.
Found what you need?
Document preview — GB/T 37036.7-2023
National Standard of the People's Republic of China
- ICS
- 35.240.01
- Classification
- L 67
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General framework
- 4.1 Fusion Level
- 4.2 Technical Architecture
- 5 business process
- 5.1 Overview
- 5.2 Sample-Level Fusion
- 5.3 Feature-Level Fusion
- 5.4 Fractional Fusion
- 5.5 Decision-Level Fusion
- 6 Functional requirements
- 6.1 General requirements
- 6.2 Multimodal Feature Collection Module
- 6.3 Multimodal Feature Storage Module
- 6.4 Multimodal Feature Comparison Module
- 7 Registration Failure Rate and Recognition Response Time
- 7.1 Multimodal recognition registration failure rate
- 7.2 Multimodal Recognition Response Time
- 8 Security Requirements
- 8.1 General requirements
- 8.2 Multimodal Information Collection Security
- 8.3 Multimodal Information Storage Security
- 8.4 Multimodal Information Use Security
- Reference
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.
This document is Part 7 of GB/T 37036 "Biometric Identification of Information Technology Mobile Devices". GB/T 37036 has been published the following sections.
--- Part 1: General requirements;
--- Part 2: Fingerprint;
--- Part 3: Human face;
--- Part 4: Iris;
--- Part 6: Finger veins;
--- Part 7: Multimodal;
--- Part 8: Presentation attack detection.
Introduction
GB/T 37036 "Information Technology Mobile Device Biometric Identification" is proposed to be composed of 9 parts.
--- Part 1: General requirements. The purpose is to establish the technical architecture, common processes and requirements for biometric identification of mobile devices.
--- Part 2: Fingerprints. The purpose is to establish the processes and requirements for fingerprint biometrics on mobile devices.
--- Part 3: Human face. The purpose is to establish the process and requirements for face biometrics on mobile devices.
--- Part 4: Iris. The purpose is to establish the processes and requirements for iris biometrics on mobile devices.
--- Part 5: Voiceprint. The purpose is to establish the procedures and requirements for voiceprint biometric identification of mobile devices.
--- Part 6: Finger veins. The purpose is to establish the process and requirements for finger vein biometrics on mobile devices.
--- Part 7: Multimodal. The purpose is to establish the processes and requirements for multimodal biometric identification on mobile devices.
--- Part 8: Presentation attack detection. The purpose is to specify mobile device presentation attack detection requirements.
--- Part 9: Test methods. The purpose is to describe functional and performance testing methods for different types of biometric identification in mobile devices.
The first part of "Information Technology Mobile Device Biometric Identification" gives the overall structure and puts forward general requirements; the subsequent parts are based on The development of biometric identification technology on mobile devices, specific modalities such as fingerprints, faces, irises, voiceprints, and finger veins are proposed.
Finally, from the perspective of security and performance, the specification of attack detection and performance testing is made to guide the implementation and evaluation of products.
Multimodal recognition technology is one of the important technologies for biometric identification of mobile devices. In order to improve the security of biometric identification of mobile devices It provides good technical solutions for security, performance and user experience, and has been widely used in various application scenarios, including mobile payment, electronic Government affairs, electronic medical insurance, etc. This document gives the technical requirements for multi-modal identification of mobile device biometric identification.
1 Scope
This document specifies the overall framework, business process, functional requirements, performance requirements and security requirements of the mobile device multi-modal identification system.
This document is applicable to the design, development, production, testing and application of multimodal recognition systems on mobile devices.
2 Normative references
The contents of the following documents constitute the essential provisions of the documents through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 36460 Information Technology Biometric Recognition Multimodal and Other Multi-biometric Fusion
GB/T 37036.1-2018 Biometric identification of information technology mobile devices Part 1: General requirements
GB/T 37036.2-2019 Biometric identification of information technology mobile devices Part 2: Fingerprint
GB/T 37036.3-2019 Information Technology Mobile Device Biometric Recognition Part 3: Face
GB/T 37036.4-2021 Biometric identification of information technology mobile devices Part 4: Iris
GB/T 37036.5-2023 Information Technology Mobile Device Biometric Identification Part 5: Voiceprint
GB/T 37036.6-2022 Information Technology Mobile Device Biometric Identification Part 6: Finger Vein
GB/T 40660-2021 Basic Requirements for Biometric Information Protection of Information Security Technology
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Mobile device
Small, hand-held information technology products that can be connected to the Internet.
Note: Mobile devices in this document refer to general-purpose mobile smart terminals, such as mobile phones, tablet computers, etc.
3.2 Mode
Combination of type of biometric item (3.3), sensor type and processing method.
[Source: GB/T 5271.37-2021, 3.2.5]
3.3 Biometric feature
A value or marker extracted from a biometric sample for comparison.
Note 1: The biometric item is the output of the complete biometric item extraction.
Note 2 to entry: The use of this term is consistent with its use in the field of pattern recognition and mathematics.
Note 3 to entry: A biometric item set can also be viewed as a processed biometric sample.
NOTE 4: Biometric items can be extracted from intermediate biometric samples.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 36460Information technology -- Biometrics -- Multimodal and other multibiometric fusion
- GB/T 37036.1-2018Information technology—Biometrics used with mobile devices—Part1: General requirement
- GB/T 37036.2-2019Information technology-Biometrics used with mobile devices-Part 2:Fingerprint
- GB/T 37036.3-2019Information technology-Biometrics used with mobile devices-Part 3: Face
- GB/T 37036.4-2021Information technology—Biometrics used with mobile devices—Part 4: Iris
- GB/T 37036.5-2023Information technology—Biometrics used with mobile devices—Part 5: Voiceprint
Similar standards
How to Download GB/T 37036.7-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 36460-2018 — Information technology -- Biometrics -- Multimodal and other multibiometric fusion
GB/T 37036.1-2018 — Information technology—Biometrics used with mobile devices—Part1: General requirement
GB/T 37036.2-2019 — Information technology-Biometrics used with mobile devices-Part 2:Fingerprint
Secure payment via Stripe
Payments accepted
GB/T 37036.7-2023
$240.00