Valid

GB/T 36991-2018Coking refined anthracene (English PDF)

焦化精蒽

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36991-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 28, 2018

Implementation date

July 1, 2019

Scope

GB/T 36991-2018 is the English-translated version of 焦化精蒽.

GB/T 36991-2018 is the Chinese national product standard for refined anthracene produced by the coking industry. It covers the product obtained from the anthracene oil of coal tar, separated with a solvent and purified by crystallization.

The standard sets the technical requirements in a table of indicators, with the appearance of the crystals and the minimum anthracene content by mass fraction for each quality grade, and the test methods, with a visual check of appearance and an anthracene content determination given in Annex A. It also lays down the inspection rules, including batch size, sampling under GB/T 2000, rounding under GB/T 8170 and retesting, together with packaging, transport, storage, the quality certificate and safety precautions. It was issued on 28 December 2018 and has applied since 1 July 2019.

Found what you need?

Document preview — GB/T 36991-2018

National Standard of the People's Republic of China

ICS
71.080.15
Classification
G 16

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Technical requirements
  • 4 Test methods
  • 5 Inspection rules

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the technical requirements, test methods, inspection rules, packaging, transportation, storage, quality certificate, safety attention of coking fines. matter.

This standard is applicable to fine sputum obtained by using eucalyptus oil in coal tar as raw material, separated by solvent and separated by crystallization.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 2000 coking solid product sampling method

GB/T 8170 Numerical Rounding Rules and Representation and Determination of Limit Values

3 Technical requirements

Fine technical indicators should meet the requirements of Table 1.

4 Test methods

4.1 Appearance. Visual inspection.

4.2 Determination of strontium content is carried out in accordance with Appendix A.

5 Inspection rules

5.1 The inspection and acceptance of product quality shall be carried out by the quality supervision department.

5.2 For continuous production, the daily packaging quantity shall be one batch, and each batch shall not exceed 200t.

5.3 The sample preparation and preparation shall be carried out in accordance with the provisions of GB/T 2000.

5.4 The product quality index is qualified and judged, and the "repair value comparison method" in GB/T 8170 is adopted.

5.5 Technical requirements of this standard All items in Table 1 are factory inspection items. The results of the factory inspection items do not meet the requirements of this standard.

The requirement is to allow a retest of the batch of products. Re-inspection of unqualified items during re-inspection. Retest results even if there is only one indicator If the technical requirements of this standard are not met, the whole batch of products is not qualified. The retest is only performed once.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 36991-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36991-2018

$95.00