GB/T 3691-2008Mechanical properties testing method of steel wool cement tile (English PDF)
钢丝网水泥板力学性能试验方法
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3691-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 30, 2008
Implementation date
March 1, 2009
Scope
GB/T 3691-2008 is the English-translated version of 钢丝网水泥板力学性能试验方法.
GB/T 3691-2008 is the Chinese standard "Mechanical properties testing method of steel wool cement tile". Its scope clause reads: This standard specifies the ferrocement slab flexural, axial tensile performance test method by specimen production, test equipment, test procedures and test Inspection reports.
This standard applies to not more than 60mm thickness of steel mesh cement board flexural, tensile mechanical properties test subject. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 3691-2008
National Standard of the People's Republic of China
- ICS
- 91.100.30
- Classification
- Q 14
- Replacing
- GB/T 3691-1983
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 specimen shape and size
- 5 3 specimen production
- 6 test equipment, apparatus and instruments
- 7 Test Method
- 8 10 test reports
- Appendix A (normative) Main test equipment, instruments
- Annex B (informative) trial
- Annex D (informative) Bending test specimen deformation uniformity of regulation and control methods
- Appendix E (normative) calculated by the axial tensile modulus of elasticity of the preload value
1 Scope
This standard specifies the ferrocement slab flexural, axial tensile performance test method by specimen production, test equipment, test procedures and test
Inspection reports.
This standard applies to not more than 60mm thickness of steel mesh cement board flexural, tensile mechanical properties test subject.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
Representation GB/T 1250 limit values and the method of determining
GB/T 8170 numerical rounding rules
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
With steel mesh or steel mesh and reinforced as a reinforcing material, cement mortar composition of the substrate material made of a thin-walled structure.
3.2
Only with steel mesh, steel mesh reinforced cement unworthy.
3.3
Configure steel mesh steel mesh and reinforced concrete.
3.4
Ferrocement panels along the longitudinal direction of the configuration of rebar.
3.5
Along the width direction of the steel mesh reinforced cement board configuration.
3.6
Ferrocement specimens under axial tension by axial role in the various stages of crack development, strength and deformation properties.
3.7
In the bending moment, bending mechanical properties of the various stages of ferrocement specimen.
3.8
A way to make ferrocement middle of the plate (300 to 400) under pure bending flexural test apparatus within the mm range.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Similar standards
Editions of GB/T 3691
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 3691-2008 | Mechanical properties testing method of steel wool cement tile | current edition | Current |
| GB/T 3691-1983 | Mechanical properties testing method of steel wool cement tile | previous edition | Superseded |
This page sells the current edition, GB/T 3691-2008. Earlier editions are listed for reference only.
How to Download GB/T 3691-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 3691-2008
$285.00