GB/T 36907-2018Determination of aniline derivatives in dye products (English PDF)
染料产品中苯胺类化合物的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36907-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 28, 2018
Implementation date
November 1, 2019
Scope
GB/T 36907-2018 is the English-translated version of 染料产品中苯胺类化合物的测定.
GB/T 36907-2018 is a method for determining 19 aniline compounds, listed in Annex A, in dye products of any form. The sample is extracted with dichloromethane in an ultrasonic bath and the extract is analysed qualitatively and quantitatively by gas chromatography-mass spectrometry.
The standard lists the reagents and materials, including a mixed standard of the aniline compounds, standard stock solutions and the internal standards 1,2-dichlorobenzene-d4 and phenanthrene-d10, and the instruments: a GC-MS system, a 60 m capillary column with a (5% phenyl) methylpolysiloxane stationary phase or equivalent, and an ultrasonic generator.
Results are judged by the rounded value comparison method of GB/T 8170-2008. Dye makers and testing laboratories use it. It was issued on 28 December 2018 and has applied since 1 November 2019.
Found what you need?
Document preview — GB/T 36907-2018
National Standard of the People's Republic of China
- ICS
- 71.100.01; 87.060.10
- Classification
- G 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 Determination method
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the determination methods for 19 aniline compounds in dye products (see Appendix A).
This standard applies to the determination of 19 aniline compounds in dye products of various dosage forms.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 8170-2008 Numerical rounding rules and the representation and determination of limit values
3 Principle
Using dichloromethane as the extractant, the sample was extracted by ultrasonic wave, and the extract was qualitatively analyzed by gas chromatography-mass spectrometry. Quantitative.
4 Determination method
4.1 General provisions
Unless otherwise specified, only reagents identified as analytically pure are used. The judgment of the test results shall be repaired according to 4.3.3 of GB/T 8170-2008. The value comparison method is carried out.
4.2 Reagents and materials
4.2.1 Mixed standard of aniline compound. 1000 mg/L is dissolved in toluene.
4.2.2 Dichloromethane.
4.2.3 Standard stock solution of aniline compound. 1000mg/L is dissolved in dichloromethane.
4.2.4 Internal standard 1.1,2-dichlorobenzene-d4, 2000mg/L dissolved in methanol.
4.2.5 Internal standard 2. phenanthrene-d10, 1000 mg/L dissolved in dichloromethane.
4.2.6 Mixed internal standard use solution. Take appropriate amount of internal standard 1 and internal standard 2, and dilute with dichloromethane to a concentration of 100 mg/L.
4.3 Instruments and equipment
4.3.1 Gas Chromatography-Mass Spectrometry (GC-MSD).
4.3.2 Column. length 60m, inner diameter 0.25mm, film thickness 0.25µm.
4.3.3 Stationary phase. (5% phenyl) methylpolysiloxane, or a stationary phase with equivalent separation capabilities.
4.3.4 Ultrasonic generator.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36907-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 36907-2018
$115.00