Valid

GB/T 36745-2018Specification for typhoon cyclone observational wind data differentiating (English PDF)

台风涡旋测风数据判别规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36745-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 17, 2018

Implementation date

April 1, 2019

Scope

GB/T 36745-2018 is the English-translated version of 台风涡旋测风数据判别规范.

GB/T 36745-2018 sets out how wind measurement data recorded during a typhoon are sorted and judged within the atmospheric boundary layer.

It gives the indicators used to divide a typhoon cyclone into zones, the basis for deciding whether a segment of wind data is representative, and the criteria for identifying wind speed samples in the eye area, the eye wall area and the peripheral area.

It defines terms such as mean wind speed, sampling data, wind angle of attack, turbulence energy, turbulence intensity, wind profile index and gust factor, and its normative Annex A gives the calculation of these wind parameters.

It is intended for engineering construction, meteorological services and related fields. It was issued on 17 September 2018 and has applied since 1 April 2019.

Found what you need?

Document preview — GB/T 36745-2018

National Standard of the People's Republic of China

ICS
07.060
Classification
A 47

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Terms and Definitions
  • 3 Typhoon vortex zoning indicator
  • 4 typhoon wind measurement data partition representative judgment
  • 5 typhoon vortex eye area wind speed sample identification
  • 6 Typhoon vortex eye wall area strong wind speed sample identification
  • 7 typhoon vortex peripheral area windy wind speed sample identification
  • Appendix A (normative appendix) Calculation of wind parameters
  • Reference

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the zoning index of the typhoon vortex in the atmospheric boundary layer, the representative identification basis of the wind data segment, and the discrimination basis for wind speed samples in the typhoon eye area, the eye wall area and the peripheral area.

This standard is applicable to engineering construction, meteorological services, etc. in engineering, meteorology and other related fields.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 Typhoon vortex

Tropical cyclones with a wind speed at the bottom of the center greater than 17.2 m/s (8).

Note: Typhoon is a category of tropical cyclones defined by the World Meteorological Organization, namely in the Pacific Northwest (north of the equator, west of the international date line, 100 degrees east longitude) the largest (or extreme) wind speed that occurs in the east reaches 32.7 m/s (12-level wind limit). In China, Japan and other places, it will often be the largest (or Greatly, tropical cyclones with wind speeds above 17.2 m/s (including tropical storms, severe tropical storms, typhoons, strong typhoons and super typhoons) are called typhoons.

2.2 Average wind speed

The average value of the wind speed in the given time interval.

Note: The time interval in this standard is 10min.

2.3 Sample data

Filtered data that meets certain metrics or conditions.

2.4 Wind angle of attack

The angle between the wind vector and the horizontal plane.

Note: The wind is facing upwards, which is the positive wind angle of attack; the wind is facing down, which is the negative wind angle of attack.

2.5 Turbulence energy

The gas flow energy generated by turbulence is calculated in Appendix A, A.1.

2.6 Turbulence intensity

The relative indicator of the strength of turbulence is expressed by the ratio of the standard deviation of the turbulent wind speed fluctuation to the average speed. The calculation formula is given in A.2.

2.7 Wind profile index

The parameter indicating the change of wind speed with height is expressed in the form of power exponent. The calculation formula is shown in A.3.

2.8 Gust coefficient

The parameter expressing the wind velocity is the maximum gust wind speed with a duration of tau and the average wind with a time interval of T0 for a time interval of T0. the speed ratio is expressed, and the calculation formula is shown in A.4.

Note: In this standard, T0 takes 10min and tau takes 3s.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 36745-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36745-2018

$145.00