Valid

GB/T 36474-2018Semiconductor integrated circuit—Measuring methods for double data rate 3 synchronous dynamic random access memory(DDR3 SDRAM) (English PDF)

半导体集成电路 第三代双倍数据速率同步动态随机存储器 (DDR3 SDRAM)测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36474-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 7, 2018

Implementation date

January 1, 2019

Scope

GB/T 36474-2018 is the English-translated version of 半导体集成电路 第三代双倍数据速率同步动态随机存储器 (DDR3 SDRAM)测试方法.

GB/T 36474-2018 gives the methods for testing third-generation double data rate synchronous dynamic random access memory (DDR3 SDRAM) integrated circuits, covering both functional verification and the measurement of electrical parameters.

Its general requirements deal with functional verification, the test conditions for electrical parameters, the oscilloscope used and the test environment. The detailed requirements then address functional verification, clock parameters, read data parameters, write data parameters, and supply current (IDD) and data pin supply current (IDDQ).

Terms defined include device under test, automatic test system, engineering evaluation board, DDR and SDRAM. It applies to the functional verification and electrical testing of DDR3 SDRAM devices. It was issued on 7 June 2018 and has applied since 1 January 2019.

Found what you need?

Document preview — GB/T 36474-2018

National Standard of the People's Republic of China

ICS
31.200
Classification
L 56

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 General requirements
  • 4.1 General Rule
  • 4.2 General Requirements for Functional Verification
  • 4.3 Test Parameters for Electrical Parameters Test
  • 4.4 Electrical Parameters Test Oscilloscope
  • 4.5 Test Environment
  • 5 Detailed Request
  • 5.1 Functional Verification
  • 5.2 Clock
  • 5.3 Reading Data Parameter
  • 5.4 write data parameters
  • 5.5 Supply Current (IDD)/Data Pin Supply Current (IDDQ)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the functional verification of the third generation double data rate synchronous dynamic random access memory (DDR3 SDRAM) for semiconductor integrated circuits. Identification and electrical parameter testing methods.

This standard applies to the third generation of double data rate synchronous dynamic random access memory (DDR3 SDRAM) in the field of semiconductor integrated circuits. Functional verification and electrical parameter testing.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.

GB/T 17574-1998 Semiconductor device integrated circuit Part 2. Digital integrated circuits

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Device under test

Tested object during the test.

3.2 Automatic test system

Integrated integrated circuit test system. Automatic test system with multiple power supplies, digital test channels and dedicated test software Development environment.

3.3 Engineering evaluation board

Test engineering evaluation board for functional verification. Engineering Evaluation Board Supports Processor Basic and Extended Functions with Input Output Port, and leave the necessary test interface.

3.4 Double data rate

The architecture of two data transmissions in each clock cycle transfers data on the rising and falling clock edges, respectively.

3.5 Synchronous dynamic random access memory

With the clock as the data synchronization reference, it is necessary to continuously refresh the stored data and randomly specify the memory that stores the address.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 36474-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36474-2018

$235.00