GB/T 36400-2018Standard terminology of decorative glass (English PDF)
建筑用装饰玻璃术语
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36400-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 7, 2018
Implementation date
May 1, 2019
Scope
GB/T 36400-2018 is the English-translated version of 建筑用装饰玻璃术语.
GB/T 36400-2018 defines the terms used for architectural decorative glass, covering the product types and the production processes.
Its terms are grouped by technique: sand blasting glass and its methods, chemical etching glass, laser etching, colored drawing glass with carving, printing and glass stickers, glued decorative glass, lamp glassware made by heating glass rods and tubes over a burner flame, melt glass and casting glass.
A final group covers other decorative glass such as aventurine glass, crystal glass, ice glass, blow molded glass, silicone coated glass and glass mosaic, and an index closes the document.
Designers, manufacturers and users of decorative glass use it for a common vocabulary in design, production and application. It was issued on 7 June 2018 and has applied since 1 May 2019.
Found what you need?
Document preview — GB/T 36400-2018
National Standard of the People's Republic of China
- ICS
- 81.040
- Classification
- Q 33
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Sand blasting glass4
- 3 Chemical etching glass5
- 4 Laser etching6
- 5 Colored drawing glass7
- 6 Glued decorative glass8
- 7 Lamp glassware8
- 8 Melt glass10
- 9 Casting glass10
- 10 Other architectural decorative glass11
- Index12
1 Scope
This Standard defines general terminologies and product types of architectural decorative glass, and terminologies and definitions related to the production process.
This Standard applies to the design, production, and application of architectural decorative glass.
2 Sand blasting glass
2.1 Sand blasting glass
MIX the abrasive with compressed air and SPRAY onto a glass surface, to cause the glass to be roughened and cracked, and to form a planar or concave-convex glass product.
2.2 Sand blasting method
A process in which a glass surface is sandblasted to make it a uniform, full-faced matte glass.
2.3 Spray method
A process in which a protective film is pasted on a glass surface, the pattern is depicted, the contours of the pattern are cut with a burin (or cut by a computer engraving machine), the protective film in the part which needs to be sandblasted and etched is removed, and then the glass is put into the sandblasting cabinet for uniform sand blasting.
2.4 Engraving method
A process in which a glass surface is engraved by sand blasting.
2.5 Shadow method
A method in which a pattern is showed by the degree and depth of sand blasting marks on glass surface.
4 Laser etching
4.9 Hollow-cutting
HOLLOW out the glass base plate and the scene behind the relief can be seen from the front through the hollow, one of the cameo processes.
4.10 Cut glass
Glass products with patterns or designs formed by grinding and polishing using various grinding tools.
5 Colored drawing glass
5.1 Colored drawing glass (pattern glass)
A glass product with patterns on its surface drawn by means of pigment spray-painting, hand-painting, printing, transfer, etc.
5.2 Carving and painting
PASTE a protective film on sand blasting glass; according to the outline of the pattern, USE a carving knife to cut; and then according to the color of the pattern, PERFORM painting and coloring.
5.3 Lines colored drawing (pattern)
A process in which the embossed painting process in lacquer art is used to make lines on glossy glass and then fill with colors.
5.4 Glass stickers
A product formed by attaching a painting or decorative material to a glass surface.
5.5 Color printing
A process in which pictures, text, and photo information are transferred onto a glass surface by printing form.
5.6 Seal printing
A method in which a rubber seal is used and etching cream or ink is used as inkpad to print patterns on a glass surface.
5.7 Offset printing
An indirect printing method in which a rubber roller is used to transfer-print the plate pattern and text onto a glass surface.
7 Lamp glassware
7.3 Stripe stir
HEAT the glass rods of several different colors in different proportions by burner flame, and then unevenly STIR, to form stripe between two or more colors.
Example: If a small quantity of red rods, orange rods, and milky white rods are melted, softened, and stirred, glass with red, orange, and white stripes can be made.
7.4 Tinted glass
HEAT and MELT glass tubes (rods) of two different colors and put together, then to PROCESS, a tinted effect can be realized.
7.5 Color points
PASTE glass blocks of one or more colors on a heated formed white product and ENGRAVE it into a design pattern.
7.6 Winding filaments
WIND glass filaments of different colors in a certain direction and regularity on a formed glass product, to form patterns and textures.
7.7 Lamp blown glass
HEAT and MELT a glass tube (rod) by burner heating, and USE a thermoplastic and blowing method to stretch, bend the glass tube and blow-produce an expanded shape, to make it a decorative glass product.
7.8 Buttons pattern
A button-shaped product formed through a special operating method by heating a glass rod.
7.9 Flowers pattern
A flower-shaped product formed through a special operating method by heating a glass rod.
7.10 Mushroom pattern
A mushroom-shaped product formed through a special operating method by heating a glass rod.
10 Other architectural decorative glass
10.1 Aventurine glass
An opacified or partially transparent glass product which contains crystalline particles and produces point-like metal reflecting luminance under light.
10.2 Crystal glass
A glass which has higher transparency, whiteness, gloss, and uniformity of melting than ordinary ware glass.
10.3 Ice glass
APPLY special glue solution on the surface of frosted glass; DRY, BURST, and PEEL off, to form a glass product with patterns similar to ice flowers on its surface.
10.4 Blow molded glass
USE a metal blowpipe to draw molten glass frit to make various hollow glass products.
10.5 Silicone coated glass
APPLY silicone coating on a glass surface by spraying, roller coating, printing, hand-painting, etc., to form a coated glass product with decorative and protective effects.
10.6 Glass mosaic
A small size colored decorative finish glass. It is also known as mosaic glass or glass mosaic tile. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 36400-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 36400-2018
$125.00