Valid

GB/T 36224-2018Inserts for aviation,self-locking with MJ threads, open type, in aluminium alloy (English PDF)

航空用MJ螺纹铝合金通孔自锁镶嵌件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36224-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 14, 2018

Implementation date

December 1, 2018

Scope

GB/T 36224-2018 is the English-translated version of 航空用MJ螺纹铝合金通孔自锁镶嵌件.

GB/T 36224-2018 covers open-type self-locking inserts with MJ threads, made of aluminium alloy for through-holes in aviation use. It specifies the structure, the dimensions and the requirements of these inserts, with the structure and sizes given in a figure and a dimension table.

The standard applies to aviation MJ-threaded aluminium alloy through-hole self-locking inserts and draws on GJB 3.2A for the limiting dimensions of MJ bolt and nut threads, on HB 7595 for MJ self-locking nuts, on ISO 8076 for chromic acid anodizing of aluminium alloys and on EN 3347 for 2024 aluminium alloy extruded bar and sections. It was issued on 14 May 2018 and has applied since 1 December 2018.

Found what you need?

Document preview — GB/T 36224-2018

National Standard of the People's Republic of China

ICS
49.030.99
Classification
V 20

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Structure, size and requirements

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the structure, dimensions and requirements of self-locking inserts for MJ-threaded aluminum alloy through-holes for aviation.

This standard applies to aviation MJ threaded aluminum alloy through-hole self-locking inserts.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GJB3.2A MJ threading Part 2. Limiting dimensions for bolts and nut threads

HB7595 General specification for MJ threaded self-locking nuts with a temperature not higher than 425 ° C

ISO 8076 Aerospace process aluminium alloy anodizing without coloring chromic acid 40VDC treatment (Aerospaceprocess-Anodic Treatmentofaluminiumaloys-Chromicacidprocess40VDC,undyedcoating)

EN3347 Aerospace series 2024 aluminum alloy extruded bar and profile A or D (AerospaceSeries AluminiumAloy AL-P2024-T8511-ExtrudedBarandSectionAorD)

3 Structure, size and requirements

3.1 Structure and size

The structure and dimensions of the insert are as shown in Figure 1 and Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 8076 · EN3347

Similar standards

How to Download GB/T 36224-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36224-2018

$75.00