GB/T 36153-2018Aluminium alloy MJ threads inserts of self-locking floating nut for aviation (English PDF)
航空用MJ螺纹铝合金带游动自锁螺母的镶嵌件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36153-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
December 1, 2018
Scope
GB/T 36153-2018 is the English-translated version of 航空用MJ螺纹铝合金带游动自锁螺母的镶嵌件.
GB/T 36153-2018 specifies the aluminium alloy inserts used in floating self-locking nuts with MJ threads for aviation. It sets the structure, dimensions and requirements of these inserts, with the dimensions given in a figure and a table.
Its normative references show the technical context: the MJ thread limits for bolts and nuts in GJB 3.2A, the general specification for MJ threaded self-locking nuts in HB 7595, anodizing of aluminium to MIL-A-8625F, passivation of stainless steel to GB/T 5267.4, and the aerospace material specifications AMS 5731, EN 2694 and EN 3347.
Aircraft fastener manufacturers and aircraft design institutes use it when producing and specifying these nut assemblies. It was issued on 14 May 2018 and has applied since 1 December 2018.
Found what you need?
Document preview — GB/T 36153-2018
National Standard of the People's Republic of China
- ICS
- 49.030.99
- Classification
- V 20
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Structure, size and requirements
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the structure, dimensions and requirements of the inserts for the MJ-threaded aluminum alloy with flying self-locking nuts for aviation.
This standard is applicable to the inserts of MJ threaded aluminum alloy with aeronautical self-locking nut for aviation.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 5267.4 fastener surface treatment corrosion resistant stainless steel passivation treatment
GJB3.2AMJ Threads Part 2. Limits for bolt and nut threads
HB7595 General specification for MJ threaded self-locking nuts with a temperature not higher than 425 ° C
MIL-A-8625F Aluminum and Aluminum Alloy Anodizing (Anodiccoatingsforaluminumandaluminumaloys)
AMS5731 Corrosion and heat resistant steel bars, wires, forges, tubes and rings, annealed (SteelCorrosionandHeat Resistance,Bars,Wire,Forgings,Tubing,Rings,15Cr25.5Ni1.2Mo2.1Ti0.006B0.30V.Consumable ElectrodeMelted, 1800°F (982°C) SolutionHeatTreated)
EN2694 Aerospace series aluminium alloy 6061 sheet and strip (Aerospaceseries-Aluminiumaloy AL-P6061-T6orT62SheetandStrip-0.4mm<=a<=6mm)
EN3347 Aerospace series aluminium alloy 2024 extruded bars and profiles (Aerospaceseries-Aluminiumaloy AL-P2024-T8511-ExtrudedbarandsectionAorD)
3 Structure, size and requirements
3.1 Structure and size
The structure and dimensions of the insert are as shown in Figure 1 and Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
EN2694 · EN3347
Similar standards
How to Download GB/T 36153-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 5267.4-2009 — Passivation of corrosion-resistant stainless-steel fasteners
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 36153-2018
$75.00