GB/T 36137-2018Integrity test method for hollow fiber ultrafiltration membrane module and microfiltration membrane module (English PDF)
中空纤维超滤膜和微滤膜组件完整性检验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36137-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
December 1, 2018
Scope
GB/T 36137-2018 is the English-translated version of 中空纤维超滤膜和微滤膜组件完整性检验方法.
GB/T 36137-2018 describes how to test the integrity of hollow fibre ultrafiltration and microfiltration membrane modules by bubble observation. It applies to integrity testing of both kinds of module and relies on the membrane separation terminology of GB/T 20103-2006.
The terms it defines include hollow fibre membrane, ultrafiltration membrane, microfiltration membrane with an average pore diameter of at least 0.01 µm, the hollow fibre curtain membrane module made of fibres, a water collecting pipe, a casting tank and sealing resin, and the pressurized hollow fibre membrane module in a closed casing, driven by positive pressure.
Membrane module manufacturers, water treatment operators and test laboratories use it to check whether a module is intact. It was issued on 14 May 2018 and has applied since 1 December 2018.
Found what you need?
Document preview — GB/T 36137-2018
National Standard of the People's Republic of China
- ICS
- 07.100.20
- Classification
- J 77
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies methods for testing the integrity of hollow fiber ultrafiltration membranes and microfiltration membrane modules by bubble observation.
This standard applies to the integrity test of hollow fiber ultrafiltration membrane and microfiltration membrane components.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 20103-2006 Membrane separation technology terminology
3 Terms and definitions
The following terms and definitions defined in GB/T 20103-2006 apply to this document. For ease of use, the following is repeated Certain terms and definitions in GB/T 20103-2006.
3.1 Hollow fiber membrane
The outer shape is a fibrous, hollow self-supporting membrane.
Note: For reverse osmosis membranes, the cortex is on the outer surface; for ultrafiltration membranes and microfiltration membranes, the cortex is on the inner surface, outer surface or inner and outer surfaces. [GB/T 20103-2006, definition 2.1.28]
3.2 Ultrafiltration membrane
It consists of a very thin epidermal layer that acts as a separation and a thicker supporting sponge or finger-like porous layer. Hundreds to millions of membranes.
Note 1. The thickness of the skin layer is usually only 0.1 µm to 1 µm, and the thickness of the porous layer is usually 125 µm.
Note 2. Most ultrafiltration membranes are asymmetric membranes. [GB/T 20103-2006, definition 5.1.1]
3.3 Microfiltration membrane
A separation membrane having a membrane average pore diameter greater than or equal to 0.01 µm. [GB/T 20103-2006, definition 5.1.2]
3.4 Hollow fiber curtain membrane module
A device consisting of a hollow fiber membrane, a water collecting pipe, a casting tank, and a resin for sealing at the end of the liquid to be treated.
Note: Rewrite GB/T 25279-2010, definition 3.1.
3.5 Pressure type hollow fiber membrane module
A membrane module composed of a hollow fiber membrane, a closed casing, and a capping resin, which is driven by a positive pressure to push the liquid.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 36137-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 20103-2006 — Technical terms for membrane separation
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 36137-2018
$185.00