Valid

GB/T 36040-2018Code for power facilities configuration of residential district (English PDF)

居民住宅小区电力配置规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36040-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 15, 2018

Implementation date

October 1, 2018

Scope

GB/T 36040-2018 is the English-translated version of 居民住宅小区电力配置规范.

GB/T 36040-2018 is the Chinese code for configuring the power facilities of residential districts, from the access point on the public grid to the users' energy metering boxes inside the district boundary.

It covers the classification of power loads, the basic requirements for supply and distribution facilities, and load calculation for dwellings, public buildings, supporting commercial premises and electric vehicle charging.

It then sets out the power supply mode and the configuration of switching stations and substations, distribution transformers, high-voltage switchgear, low-voltage equipment, wires and cables, energy metering, lightning protection and grounding, and charging facilities, with a normative annex classifying the main electricity consumption of residential buildings.

It applies to the supporting power works of new, rebuilt and extended residential districts. It was issued on 15 March 2018 and has applied since 1 October 2018.

Found what you need?

Document preview — GB/T 36040-2018

National Standard of the People's Republic of China

ICS: 91.140.50
Classification: P 63

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Basic requirements
5 Residential Residential Community Classification and Basic Requirements
5.1 Power load classification
5.2 Basic Requirements for Supply and Distribution Facilities
6 Load Calculation
6.1 Basic Requirements
6.2 residential electricity load
6.3 Public Building Facilities and Supporting Commercial Power Consumption
6.4 Electric Vehicle Charging Device
7 Power supply mode
8 switch station, substation
9 Distribution Transformer
10 High Voltage Switchgear
11 Low-voltage electrical equipment
12 Wire and Cable
13 Energy Metering
14 Lightning Protection and Grounding System
15 Electric vehicle charging facilities
Appendix A (Normative Appendix) Classification of Main Electricity Consumption of Residential Buildings

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard stipulates the configuration of the power supply and distribution facilities of the public power grid access point to the user's energy metering box (cabinet) within the red line of the residential area of the residential community.

This standard is applicable to the new construction, reconstruction and expansion of the residential power district supporting project.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.

GB 3096 Acoustic Environmental Quality Standard

GB/T 18487.1-2015 Conductive charging system for electric vehicles Part 1. General requirements

GB/Z 29328 Important Power User Power Supply and Self-Contained Emergency Power Supply Configuration Specification

GB 50016 Code for Design of Building Fire Protection

GB 50052 power distribution system design specification

GB 50053 20kV and below substation design specifications

GB 50054 Low Voltage Distribution Design Specification

GB 50057 Lightning Design Code for Buildings

GB/T 50065 Grounding Design Specification for AC Electrical Installations

GB 50067 Design of fire protection for garages, garages and car parks

DL/T 448 Electrical Metering Device Technical Management Procedures

JGJ16 Civil Building Electrical Design Specification

JGJ242 Residential Building Electrical Design Specification

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Switch station

The general term for power distribution equipment and civil engineering facilities that are directly powered by higher-level substations and redistribute power.

3.2 Distribution station

There are 10 (20) kV RMUs, distribution transformers, low-voltage power distribution devices, monitoring and metering devices, and reactive power compensation devices. They are collectively referred to as distribution stations.

3.3 Multi-storey residential building

Residential buildings with a building height of no more than 27m include residential buildings with commercial service outlets.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/Z 29328 · GB 50053 · JGJ16 · JGJ242

Cited by

GB/T 43025-2023Technical guidelines for power supply schemes of users connected to power grid

Similar standards

GB/T 16934-2013|GB 14050-2008|GB/T 14294-2026|GB/T 22755-2026|GB/T 24480-2026|GB/T 33833-2026

How to Download GB/T 36040-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.