Valid

GB/T 35813-2018Guidelines for the conduct of tests for distinctness, uniformity and stability(DUS)—Smoke tree (Cotinus Mill.) (English PDF)

植物新品种特异性、一致性、稳定性测试指南 黄栌属

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35813-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

February 6, 2018

Implementation date

September 1, 2018

Scope

GB/T 35813-2018 is the English-translated version of 植物新品种特异性、一致性、稳定性测试指南 黄栌属.

GB/T 35813-2018 is the Chinese national guideline for testing new plant varieties of smoke tree (Cotinus) for distinctness, uniformity and stability, the DUS test.

It sets the technical requirements for the test material, which must be healthy vegetatively propagated plants more than two years old, at least nine per variety, submitted without treatments that affect the expression of traits.

It also covers the test method, with the growing cycle, the test location and the test conditions, how distinctness, uniformity and stability are judged, the grouping of varieties and the traits with their expression states, codes and example varieties.

Annex A lists the traits and Annex B gives the technical questionnaire. Testing bodies and applicants for plant variety protection use it. It was issued on 6 February 2018 and has applied since 1 September 2018.

Found what you need?

Document preview — GB/T 35813-2018

National Standard of the People's Republic of China

ICS
65.020.20
Classification
B 05

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 DUS test technical requirements
  • 4.1 Test Materials
  • 4.2 Test Method
  • 5 specificity, consistency, stability evaluation
  • 5.1 Specificity
  • 5.2 Consistency
  • 5.3 Stability
  • 6 varieties of groups
  • 6.1 species group description
  • 6.2 group traits
  • 7 traits and related symbols that
  • 7.1 trait type
  • 7.2 trait expression status and code
  • 7.3 standard varieties
  • Appendix A (normative) varieties traits
  • Appendix B (Informative) Technical Questionnaire
  • Reference

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the Araceae genus [Cotinus (Tourn.) Mil.] Plant new varieties of distinctness (distinctness), consistency (uniformity) and stability (stability) testing technical requirements.

This standard applies to all varieties of testa yellow varieties.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 19557.1-2004 Plant Variety, Consistency, Stability Test Guideline General

3 Terms and definitions

GB/T 19557.1-2004 defined terms and definitions apply to this document.

4 DUS test technical requirements

4.1 Test Materials

4.1.1 The notified agency shall notify the time and place where the test variety is delivered and the quantity and quality of the plant material required for the test. From non-test ground Countries or regions to submit the material, the applicant should be in accordance with the relevant provisions of the entry and exit and transport customs, phytosanitary and other related documents.

4.1.2 The test materials submitted should be vegetatively propagated over two-year-old plants.

4.1.3 The number of test materials submitted shall not be less than 9.

4.1.4 The material of the new variety to be tested should be a plant which is free from pests and diseases and grows normally.

4.1.5 Except where the approving authority allows or requires the processing of the material, the plant material submitted shall not carry out any effect on the expression of the trait Reason. If processed, provide details of the process.

4.2 Test method

4.2.1 Test cycle

In the case of compliance with the test conditions, at least one growth cycle test.

4.2.2 Test location

The test should be conducted at the place designated by the approving authority.

4.2.3 Test conditions

The test should be carried out under the condition that the relevant traits of the tested species can be expressed completely, and the selected test materials should be at least at the test site […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 35813-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35813-2018

$235.00