GB/T 35714-2017Marine propulsion motors (English PDF)
船舶推进电动机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35714-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35714-2017 is the English-translated version of 船舶推进电动机.
GB/T 35714-2017 is the Chinese standard "Marine propulsion motors". Its scope clause reads: This standard specifies the classification, basic parameters, requirements, test methods, inspection of ship exchange promotion motor (hereinafter referred to as propulsion motor) Rules, marking, packaging, transport and storage and spare parts.
This standard applies to the ship to promote the motor exchange. This standard does not apply to superconducting propulsion motor, nor applies to other than radial magnetic field type permanent magnet motor.
Found what you need?
Document preview — GB/T 35714-2017
National Standard of the People's Republic of China
- ICS
- 47.020.60
- Classification
- U 60
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
1 Scope
This standard specifies the classification, basic parameters, requirements, test methods, inspection of ship exchange promotion motor (hereinafter referred to as propulsion motor)
Rules, marking, packaging, transport and storage and spare parts.
This standard applies to the ship to promote the motor exchange.
This standard does not apply to superconducting propulsion motor, nor applies to other than radial magnetic field type permanent magnet motor.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 755 Rotating motor quotas and performance
GB/T 997 rotary motor structure type, installation type and junction box location classification (IM code)
GB/T 1029 three-phase synchronous motor test method
GB/T 1971 rotary motor line end signs and direction of rotation
GB/T 2423.4 Environmental testing for electric and electronic products Part 2. Test methods Test Db. Alternating hot and humid (12h 12h cycle ring)
GB/T 2423.16-2008 Environmental testing for electric and electronic products Part 2. Test methods Test J and guidance Mildew
GB/T 2423.17 Environmental testing for electric and electronic products Part 2. Test methods Test Ka. Salt spray
GB/T 7060 marine rotary motor basic technical requirements
GB/T 10068 Shaft center height of 56mm and above the motor vibration and vibration measurement, assessment and limits
GB/T 10069.1 rotary motor noise measurement methods and limits - Part 1. Rotor electrical noise measurement method
GB/T 10069.3 rotary motor noise measurement methods and limits - Part 3 noise limits
Environmental Technical Requirements for Tropical Rotating Electrical Machines GB/T 12351
GB/T 14711-2013 General safety requirements for small and medium sized rotating electrical machines
GB/T 20160 rotating motor insulation resistance test
GB/T 22669 three phase permanent magnet synchronous motor test method
GB/T 22670 inverter power supply three-phase cage induction motor test method
GB/T 22715 rotary AC motor stator forming coil withstand voltage level
GB/T 22719.1 alternating current low-voltage motors interspersed winding inter-turn insulation Part 1. Test methods
GB/T 22719.2 alternating current low-voltage motors scattered windings inter-turn insulation Part 2. Test limits
JB/T 5810 Motor Pole Winding and Field Winding Inter Turn Test Specification
Test methods and limits for turn - to - turn insulation of molded low - voltage windings of JB/T 5811
GD22-2015 Guide for Type Approval Test of Electric and Electronic Products (China Classification Society) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35714-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35714-2017
$235.00