Valid

GB/T 35704-2017Ship shaft brushless doubly-fed AC generator (English PDF)

船舶轴带无刷双馈交流发电机

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35704-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35704-2017 is the English-translated version of 船舶轴带无刷双馈交流发电机.

GB/T 35704-2017 is the Chinese standard "Ship shaft brushless doubly-fed AC generator".

Its scope clause reads: This standard specifies the rated power of 30kVA ~ 1750kVA ship shaft brushless doubly-fed alternator (hereinafter referred to as generator) Terms and definitions, classification and marking, design and construction, requirements, test methods, inspection rules, marking, packaging, shipping and storage.

This standard applies to the rated power of 30kVA ~ 1750kVA, the rated frequency of 50Hz shaft brushless doubly-fed AC generator Machine design, manufacture and inspection.

60Hz ship shaft brushless doubly-fed alternator can refer to use. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 35704-2017

National Standard of the People's Republic of China

ICS
47.020.60
Classification
U 61

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 classification and marking
  • 5 Design and Structure
  • 6 Requirements
  • 7 Test Method
  • 9 logo, packaging, transportation and storage
  • Appendix A (informative) chassis number and the corresponding relationship between speed and rated power
  • Appendix B (Informative) Shaft extension keys size and tolerance

1 Scope

This standard specifies the rated power of 30kVA ~ 1750kVA ship shaft brushless doubly-fed alternator (hereinafter referred to as generator)

Terms and definitions, classification and marking, design and construction, requirements, test methods, inspection rules, marking, packaging, shipping and storage.

This standard applies to the rated power of 30kVA ~ 1750kVA, the rated frequency of 50Hz shaft brushless doubly-fed AC generator

Machine design, manufacture and inspection. 60Hz ship shaft brushless doubly-fed alternator can refer to use.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

GB/T 1971 rotary motor line end signs and direction of rotation

GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Ka. Salt spray

Protection class (IP code) classification of the overall structure of a rotating electric machine GB/T 4942.1-2006

GB/T 7060 marine rotary motor basic technical requirements

GB/T 10068 Shaft center height of 56mm and above the motor vibration and vibration measurement, assessment and limits

GB/T 10069.1 rotary motor noise measurement methods and limits - Part 1. Rotor electrical noise measurement method

GB/T 10250 marine electrical and electronic equipment electromagnetic compatibility

General specification for marine synchronous generator GB/T 12975-2008

General technical requirements for packaging of electromechanical products

GB/T 14711-2013 General safety requirements for small and medium sized rotating electrical machines

GB/T 22719.1 alternating current low-voltage motors interspersed winding inter-turn insulation Part 1. Test methods

CB/T 3667.1 ship cable laying and electrical equipment installation accessories cable through the device

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Brushless doubly fed generator

The stator has two groups of three-phase symmetrical windings with different pole pairs (power winding and control winding respectively), the power winding is connected with the power grid (or negative

Load), the control winding through the converter connected to the grid (or load), by adjusting the control winding voltage and current amplitude and frequency, the power winding in

The generator can output constant voltage and frequency within the running speed range of the product.

3.2 Generator power windings

Generator connected to the grid (or load) of the stator winding.

3.3 Generator control windings

The generator is connected to the stator windings of the converter.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35704-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35704-2017

$355.00