GB/T 35703-2017Specification of system design for high-voltage direct current (HVDC) transmission using voltage sourced converters (VSC) (English PDF)
柔性直流输电系统成套设计规范
This is a limited preview
Buy now to download the full PDF (35 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35703-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35703-2017 is the English-translated version of 柔性直流输电系统成套设计规范.
GB/T 35703-2017 is the Chinese standard "Specification of system design for high-voltage direct current (HVDC) transmission using voltage sourced converters (VSC)".
Its scope clause reads: This standard specifies the terms and definitions of flexible DC transmission system package design, the overall requirements, design conditions, design requirements, multi-end flexible DC transmission system, over-voltage and insulation coordination, converter equipment parameters of a station, converter station control and protection systems and auxiliary systems and so on.
This standard applies to the design of flexible DC transmission system based on modular multi-level converter topology (excluding the DC line And grounding pole line design), other topological structure of the flexible DC transmission system or some of the special requirements of the flexible DC transmission project may Reference to use.
Found what you need?
Document preview — GB/T 35703-2017
National Standard of the People's Republic of China
- ICS
- 29.200
- Classification
- K 46
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General Requirements
- 4.1 System Design
- 4.2 related equipment or subsystem technical specifications
- 5 design conditions
- 5.1 Environmental conditions
- 5.2 large transport conditions
- 5.3 communication system conditions
- 5.4 DC transmission line parameters
- 5.5 Ground and Ground Poles (if any)
- 6 design requirements
- 6.1 Rating
- 6.2 steady-state performance requirements
- 6.3 Flexible DC transmission system operation mode and control mode design
- 6.4 Dynamic Performance Requirements
- 6.5 Reactive Compensation and Voltage Control
- 6.6 Harmonic performance requirements
- 6.7 DC bias current
- 6.8 System Immunity and Communication Interference
- 6.9 audible noise
- 6.10 Design Loss
- 6.11 Reliability
- 7 multi-terminal flexible DC transmission system
- 7.1 Multi-terminal flexible DC transmission system structure
- 7.2 Multi-terminal flexible DC transmission system DC voltage control
- 8 over voltage and insulation with
- 8.1 Overview
- 8.2 The basic principles of arrester configuration
- 8.3 Temporary Overvoltage Requirements
- 8.4 over-voltage determination
- 8.5 arrester performance requirements
- 8.6 Insulation level
- 8.7 Air gap
- 8.8 creepage distance
- 9 converter station a device parameter requirements
- 9.1 Flexible DC converter valve
- 9.2 Bridge Reactor
- 9.3 Connecting Transformer
- 9.4 DC (smoothing) reactor
- 9.5 Measuring Device
- 9.6 Start resistor
- 9.7 Grounding Equipment
- 9.8 arrester
- 9.9 DC Post Insulator
- 9.10 Casing
- 9.11 DC switchgear
- 9.12 AC switchgear
- 10.1 Overview
- 10.2 Converter Station Operator Control System
- 10.3 DC Control System
- 10.4 DC Protection System
- 10.5 Converter Station Master Clock System
- 10.6 Protection and Fault Recording Information Management Substation
- 10.7 Scheduling Automation and DC Remote Systems
- 10.8 station fault recording system
- 10.9 DC Line Fault Location System
- 10.10 Electric energy metering system terminal
- 10.11 Reliability Requirements
- 10.12 Interface Requirements
- 10.13 converter station control and protection system test requirements
- 11.1 station electricity system
- 11.2 Valve Cooling System
- 11.3 Fire Protection System
- 11.4 Heating, Ventilation and Air Conditioning
1 Scope
This standard specifies the terms and definitions of flexible DC transmission system package design, the overall requirements, design conditions, design requirements, multi-end flexible
DC transmission system, over-voltage and insulation coordination, converter equipment parameters of a station, converter station control and protection systems and auxiliary systems and so on.
This standard applies to the design of flexible DC transmission system based on modular multi-level converter topology (excluding the DC line
And grounding pole line design), other topological structure of the flexible DC transmission system or some of the special requirements of the flexible DC transmission project may
Reference to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 311.1 insulation coordination Part 1. Definitions, principles and rules
GB/T 311.2 Insulation coordination Part 2. Guidelines for the use
GB/T 311.3 Insulation coordination with Part 3. HVDC converter insulation coordination procedures
GB/T 1984 high-voltage AC circuit breakers
GB/T 1985 high-voltage AC isolation switch and earthing switch
GB 3096 acoustic environment quality standards
GB/T 7260 (all parts) uninterruptible power supply equipment
GB 12348 industrial enterprises boundary environmental noise emission standards
GB/T 13498 HVDC terms
GB/T 14549 Power Quality Utility Harmonic
GB/T 16927.1 high voltage test techniques - Part 1. General definitions and test requirements
GB/T 20989 HVDC converter station to determine the loss
GB/T 26216.1 HVDC transmission system DC current measuring device Part 1. Electronic DC current measuring device
GB/T 26217 HVDC transmission system DC voltage measurement device
GB/T 26218 (all parts) Contamination conditions used in the selection of high voltage insulators and size determination
GB/T 30553 HVDC based on voltage source converter
GB 50016 architectural design code for fire protection
GB 50019 Industrial building heating, ventilation and air conditioning design specifications
GB 50116 automatic fire alarm system design specifications
GB 50140 fire extinguisher configuration design specifications
Fire protection water supply and fire hydrant system specification
Voltage source converter for GB/T 34118 HVDC systems Terminology
GB/T 35702 (all parts) high voltage DC system voltage source converter valve loss
DL/T 5044 Power Engineering DC Power System Design Technical Specification […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35703-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35703-2017
$530.00