Valid

GB/T 35696-2017Requirements for marine medium voltage AC diesel generator set and control system (English PDF)

船舶交流中压柴油发电机组及控制系统要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35696-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35696-2017 is the English-translated version of 船舶交流中压柴油发电机组及控制系统要求.

GB/T 35696-2017 is the Chinese standard "Requirements for marine medium voltage AC diesel generator set and control system". Its scope clause reads: This standard stipulates the classification, requirements, inspection rules, test methods, and signs for medium voltage diesel generator sets and control systems for ships.

Packaging, transportation, storage. This standard applies to AC medium voltage diesel generator sets and controls for ships rated at 3.3kV, 6.3kV, 10.5kV and 13.8kV. System design and manufacturing. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 35696-2017

National Standard of the People's Republic of China

ICS
47.020.60
Classification
U 61

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Steady-state frequency regulation steady frequency regulation

1 Scope

This standard stipulates the classification, requirements, inspection rules, test methods, and signs for medium voltage diesel generator sets and control systems for ships.

Packaging, transportation, storage.

This standard applies to AC medium voltage diesel generator sets and controls for ships rated at 3.3kV, 6.3kV, 10.5kV and 13.8kV.

System design and manufacturing.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 191 packaging, storage and transportation logo

GB/T 755 Rotary Motor Quota and Performance

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature

GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Db. Alternating heat (12h

12h loop)

GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sine)

GB/T 2423.16-2008 Environmental testing for electric and electronic products Part 2. Test methods Test J and Guidelines. Growth of mildew

GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Ka. Salt spray

GB/T 2820.9-2002 Reciprocating internal combustion engine driven alternating current generating sets Part 9. Measurement and evaluation of mechanical vibration

GB/T 2820.10-2002 Reciprocating internal combustion engine driven alternating current generator sets Part 10. Measurement of noise (face method)

GB/T 6072.5 Reciprocating internal combustion engine performance - Part 5. Torsional vibration

GB/T 14711-2013 General safety requirements for small and medium rotary motors

CB/T 3254.2 Bench Test Methods for Marine Diesel Engines

CB/T 3853 marine diesel engine shaft torsional vibration measurement method

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Steady-state frequency regulation steady frequency regulation

The generator sets are set under the conditions of rated load and rated frequency, and the load is changed from no-load to rated load or from rated load to no-load even change.

During the conversion, the percentage of the difference between the stable no-load frequency fi and the rated frequency fN to the rated frequency fN is calculated according to equation (1).

deltafs= fi-fN fN ×

100% (1)

In the formula.

deltafs --- steady-state frequency adjustment, expressed in %;

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35696-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35696-2017

$295.00