GB/T 35686-2017Electrical apparatus and installation in areas endangered by explosives (English PDF)
火炸药危险环境用电气设备及安装
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35686-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35686-2017 is the English-translated version of 火炸药危险环境用电气设备及安装.
GB/T 35686-2017 is the Chinese standard "Electrical apparatus and installation in areas endangered by explosives". Its scope clause reads: This standard stipulates the general requirements for the installation of electrical equipment for hazardous environments for explosives and additional requirements for different areas.
This standard is applicable to the selection and installation of electrical equipment and electrical equipment used in explosive environments.
Found what you need?
Document preview — GB/T 35686-2017
National Standard of the People's Republic of China
- ICS
- 29.260.20
- Classification
- K 35
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General Requirements
- 4.1 Basic requirements
- 4.2 Selection and Installation of Electrical Equipment
- 4.3 Preventing Danger (Ignition) Sparks
- 4.4 Protection Devices and Monitoring Devices
- 4.5 Emergency Power Off and Shutdown
- 4.6 Static
- 4.7 Lightning
- 4.8 Special Requirements for Certain Types of Electrical Equipment
- 5 Additional Requirements for E0 Zone Equipment and Installation
- 5.1 Additional Requirements for Electrical Equipment
- 5.2 Special Requirements for Rotary Motors
- 5.3 Special requirements for switches and controls
- 5.4 Special requirements for plug-in devices
- 5.5 Special requirements for space heaters
- 5.6 Special Requirements for Luminaires
- 6 Additional requirements for equipment and installation in Zone E1
- 6.1 Additional Requirements for Electrical Equipment
- 6.2 Special requirements for rotating electrical machines
- 6.3 Special requirements for switches and controls
- 6.4 Special requirements for plug-in devices
- 6.5 Special requirements for space heaters
- 6.6 Special Requirements for Lighting
- 6.7 Special Requirements for Test Equipment
- 7 Additional Requirements for E2 Zone Equipment and Installation
- 7.1 Additional Requirements for Electrical Equipment
- 7.2 Special requirements for space heaters
- 7.3 Special requirements for mobile electrical equipment
- 7.4 Special requirements for test equipment
- 7.5 Special Requirements for Depots Stored with Explosive Properties
- Appendix A (Informative) List of substances with explosive properties
- Appendix B (informative) Test method for the determination of decomposition temperature
1 Scope
This standard stipulates the general requirements for the installation of electrical equipment for hazardous environments for explosives and additional requirements for different areas.
This standard is applicable to the selection and installation of electrical equipment and electrical equipment used in explosive environments.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 2900.71 Electrician terminology electrical apparatus
GB/T 3836 (all parts) Explosive environment
GB 3836.1 Explosive atmospheres Part 1. General requirements for equipment
GB 3836.4 Explosive atmospheres Part 4. Equipment protected by intrinsically safe "i"
GB/T 3836.15 Explosive atmospheres Part 15. Design, selection and installation of electrical installations
GB/T 4208 enclosure protection (IP code)
GB/T 4942.1 Degree of protection (IP code) for the whole structure of rotating electrical machines
GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750V - Part 4. Cords and flexible cables
GB/T 5023.3-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 3. Fixed wiring
Sheathed cable
GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 5. Flexible cables (cords)
GB 7000.1 luminaires Part 1. General requirements and tests
GB 12476 (all parts) Electrical equipment for flammable dust environment
GB/T 12706.4 Extruded Insulated Power Cables and Accessories Rated Voltage 1kV (Um=1.2kV) to 35kV (Um=40.5kV)
Part 4. Test Requirements for Power Cable Accessories for Rated Voltages from 6kV (Um = 7.2kV) to 35kV (Um = 40.5kV)
Ballast Performance Requirements for GB/T 14044 Tube Fluorescent Lamps
GB/T 14048.4 Low-voltage switchgear and control equipment. Part 4-1. Contactors and motor starter electromechanical contactors
And motor starters (including motor protectors)
GB/T 14048.7 Low-voltage switchgear and control equipment - Part 7-1. Terminal block for copper conductors of auxiliary devices
GB/T 14536.1 Automatic electrical controls for household and similar use Part 1. General requirements
GB/T 14536.10 Special requirements for temperature-sensitive controllers for electric automatic controllers for household and similar use
GB/T 15144 AC electronic ballasts for tubular fluorescent lamps performance requirements
GB/T 16895.21-2011 Low-voltage electrical apparatus -Part 4-41.Safety protection against electric shock
GB/T 19212.5 Safety regulations for transformers, reactors, power supply units and similar products with supply voltages of 1100V and below
Part 5. Particular requirements and tests for isolating transformers and power supply units incorporating isolation transformers
GB 19510.4 Lamp control apparatus Part 4. Particular requirements for AC electronic ballasts for fluorescent lamps
GB 19510.9 Lamp control devices - Part 9. Particular requirements for ballasts for fluorescent lamps
GB 50057 Lightning Design Code for Buildings
IEC /T S60079-32-1.2013 Explosive Atmospheres Part 32-1. Guidelines for Electrostatic Hazards (Explosive atmospheres- […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35686-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35686-2017
$355.00