GB/T 35602-2017Green product assessment - Coating material (English PDF)

3.1 green product

high-quality product that is harmless or less harmful for ecological environment and human health, less resource- and energy-consuming and meets environmental protection requirements in the total life cycle

[GB/T 33761-2017, definition 3.1]

3.2 coating material

a kind of liquid, paste or powder product, which can form a coating with protection, decoration and/or other specific functions after it is applied on substrate

[GB/T 5206-2015, definition 2.51]

3.3 water-borne coating material

a kind of coating material of which the main component of volatile matter is water

[GB/T 5206-2015, definition 2.274]

Note 1: For example water-borne coating material for architectures and water-borne coating material for industry uses, etc.

Note 2: Coating products which are used while adding water also belong to water-borne coating material, e.g. inorganic powder coating material for architectures.

3.4 water-borne coating material for architectures

wall coating material prepared by adding auxiliaries, water, cosolvents or the like in main film forming matters such as synthetic resin emulsion and natural resin emulsion and applied on the internal and external surfaces of architecture which uses cement-based and other nonmetallic material as the substrate

3.5

inorganic powder coating material for architectures powder material taking cement, gypsum and the like as main bonding material, mineral powder as main pigment and filler, supplemented by other pigments and auxiliaries; which uses water as dispersion medium and forms coating on architecture surface

Note: For example, diatomaceous decorative interior wall material, shell powder decorative wall material, water-based inorganic dry powder interior decoration material, etc.

3.6

water-borne coating material for industry uses material prepared by adding auxiliaries, water, cosolvents or the like in main film forming matters such as water-borne resin and applied on various substrates such as wood-based panel, steel structure and cement-based substrate to form coating with protection, decoration and/or other specific functions

Note: For example, water-borne coating material for woodenware, water-borne floor coating, water-borne automobile refinishing coating, water-borne anti-corrosion coating, etc.

3.7 coating powder

powder coating material which may be used to make continuous film after it is melted (or cured)

[GB/T 5206-2015, definition 2.52]

3.8 radiation curable coating material

a kind of coating material cured via radiation curing way

Note: For example, ultraviolet (UV) curable material, electron beam (EB) curable material, etc.

3.9 high solid coating material

a kind of solvent-based coating material with volume fraction of non-volatile matter measured under construction state according to specified method greater than or equal to 70%

3.10 solvent-free coating material

a kind of solvent-based coating material with non-volatile matter content measured under construction state according to specified method greater than or equal to 95%

3.11 volatile organic compound; VOC

any organic liquid or solid that can evaporate naturally at normal temperature and pressure where it is present

[GB/T 5206-2015, definition 2.270]

3.12 volatile organic compound content; VOC content; VOCC

VOC content; VOCC the mass of volatile organic compounds existing in coating material measured under specified conditions

Note: The property and quantity of compound to be considered depend on the application field of coating material. For each application field, the limit and determination or calculation method are specified or stipulated by laws and regulations.

[GB/T 5206-2015, definition 2.271]

3.13 semi-volatile organic compound; SVOC

any organic liquid or solid whose natural evaporation is slower than that of volatile organic compound (VOC) at normal temperature and pressure where it is present

Note: EU resolution (EU) 2015/886 specifies that the term SVOC refers to the volatile organic compound with boiling point between 250°C and 370°C at 101.3kPa standard atmospheric pressure and retention time between n-tetradecane and n-docosane (including n-tetradecane and n-docosane) n nonpolar chromatographic column.

3.14

total volatile organic compounds (TVOC) emission level total mass of volatile organic compound with retention time between n-hexane and n-hexadecane (including n-hexane and n-hexadecane), which is sampled with absorption tube and separated via nonpolar chromatographic column under actual release environment of specified simulation coating material (including coating)

3.15 volatile aromatic hydrocarbon; VAH

any volatile hydrocarbon containing at least one benzene ring in molecular structure, with initial boiling point lower than or equal to 250°C at 101.3kPa standard atmospheric pressure

Note: For example, benzene, toluene, xylene, trimethylbenzene, tetramethylbenzene, styrene, etc.

5.1 Basic requirements

5.1.1 Basic requirements for manufacturing enterprise

5.1.1.1

Enterprise shall strengthen cleaner production during the production process.

5.1.1.2

Enterprise should adopt advanced technology and process advocated by the nation, but not use obsolete and prohibited technology, process, equipment or material publicized by the nation or relevant department and the prohibited material beyond the range shall not be selected.

5.1.1.3

Within 3 years up to the assessment date, the to-be-assessed enterprise shall not have major safety accident and/or major environmental emergency (if enterprise is established for less than 3 years, enterprise shall not have major safety accident and/or major environmental emergency from its establishment date to the assessment date).

5.1.1.4

Enterprise shall be established according to GB/T 19001, GB/T 24001 and GB/T 28001 and shall run quality management system, environmental management system, and occupational health and safety management system.

5.1.1.5

Enterprise safety production standardization level shall meet the requirements of AQ/T 9006; safety devices of construction project shall meet "Three Simultaneous" system.

5.1.1.6

Workplace environment (dust, noise, chemicals in the air, etc.) shall meet the relevant requirements of GBZ 2.1 and GBZ 2.2; occupational health of construction project shall meet "Three Simultaneous" system.

5.1.1.7

In terms of environment protection, enterprise shall meet requirements of environmental protection laws and regulations such as Regulations on the Administration of Construction Project Environmental Protection, environmental impact assessment system, "Three Simultaneous" system of environmental protection and pollutant discharge permit system.

5.1.1.8

Collection, storage and disposal of general solid waste shall meet the relevant requirements of GB 18599; the storage of hazardous waste shall be in strict accordance with relevant requirements of GB 18597, and the hazardous waste shall be delivered to organizations holding hazardous waste business certificate for disposal later.

5.1.1.9

Enterprise shall be established according to Regulations on the Safety Administration of Dangerous Chemicals and run safety management system for hazardous chemicals.

5.1.1.10

Enterprise shall pay sustained attention to and meet national and local requirements for pollutant emission, cleaner production and the like regarding paint of coating material.

5.1.1.11

Enterprise shall ensure the normal operation of pollutant treatment equipment and facilities and equip pollutant detection and online monitoring devices according to relevant environmental protection requirements.