GB/T 35565-2017Test methods of wooden activated carbon - Determination of formaldehyde adsorption (English PDF)
木质活性炭试验方法 甲醛吸附率的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35565-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35565-2017 is the English-translated version of 木质活性炭试验方法 甲醛吸附率的测定.
GB/T 35565-2017 is the Chinese standard "Test methods of wooden activated carbon - Determination of formaldehyde adsorption". Its scope clause reads: This standard specifies the method of determination of formaldehyde adsorption rate of wood activated carbon.
This standard applies to wood granular activated carbon, but also for other granular activated carbon. Its clauses include method summary; reagent; instruments and equipment.
Found what you need?
Document preview — GB/T 35565-2017
National Standard of the People's Republic of China
- ICS
- 65.050
- Classification
- B 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 method summary
- 3 reagent
- 4 instruments and equipment
1 Scope
This standard specifies the method of determination of formaldehyde adsorption rate of wood activated carbon.
This standard applies to wood granular activated carbon, but also for other granular activated carbon.
2 method summary
Under the specified test conditions, a formaldehyde-laden nitrogen stream is passed through a sample of activated carbon of known mass until the sample mass does not increase,
As adsorption saturation. The formaldehyde adsorption rate of the sample is expressed in milligrams per gram of formaldehyde adsorbed formaldehyde (mg/g).
3 reagent
3.1 Formaldehyde solution (GB/T 685)
Analytical purity, formaldehyde content 37.0% ~ 40.0%.
3.2
high purity nitrogen (GB/T 8979).
4 instruments and equipment
4.1 Nitrogen gas flow meter
Flow range 60mL/min ~ 600mL/min.
4.2 Analytical Balance
Sense of 0.1mg.
4.3
constant temperature water bath temperature control range RT (room temperature) ~ 99 °C.
4.4
electric oven, temperature range RT (room temperature) 10 °C ~ 250 °C.
4.5
Adsorption tube made of industrial white glass, the appearance of no bubbles and other obvious defects. Glass welding should not have more melting
Then heap and crease, plug for the grinding mouth connection. Adsorption tube must be tested for airtightness before use. Inside the tube scale inside diameter (10 ±
0.3) mm, see Figure 1.
4.6 porous gas bottle
Capacity of 250mL.
4.7 mixed bottle
Ball diameter 60mm two ball shell-type.
4.8 temperature control with a snake tube
Length of not less than 1m.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 35565-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35565-2017
$90.00