Valid

GB/T 35562-2017Grades of surface air temperature assessment (English PDF)

气温评价等级

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35562-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35562-2017 is the English-translated version of 气温评价等级.

GB/T 35562-2017 fixes the grades used to assess surface air temperature.

Clause 1 states that the standard specifies the calculation of temperature averages over time and space from the daily mean temperature, together with the grades, the indicators and the methods of the temperature assessment, and that it applies to temperature-related monitoring, prediction, assessment and services.

The document is short and, as the contents show, carries no normative references clause, Scope is followed by Terms and definitions, then the method for calculating average temperature, then the grades, indicators and methods, and finally a normative appendix on the calculation of climate averages, anomalies and standard deviation, plus a list of references.

The terms clause defines air temperature, taken from QX/T 50-2007 as the physical quantity indicating how hot or cold the air is, the region, as a geographical area such as an administrative area or a watershed or any given range, the average temperature, as the average of temperature over a period of time or over space, the climate normal, taken from QX/T 152-2012 as the average of a meteorological element over thirty years or more, and the standard deviation, as the average magnitude of the deviation of each value in a series from its average; it also defines the difference between a given temperature and its climatological average, whose term name the draft prints illegibly.

Several of these entries carry a note stating that the unit is degrees Celsius.

The clause on calculating the average temperature opens with the period average temperature, obtained by dividing the sum of the daily mean temperatures in the period by the number of days in it, and refers to a formula; the draft breaks off there, so the grades and indicators themselves are not shown on the page.

The foreword records that the standard was proposed and is handled by the National Climate and Climate Change Technical Committee (SAC/TC540), and that the drafting unit is the National Climate Center. It was issued on 29 December 2017 and has applied since 1 July 2018.

Found what you need?

Document preview — GB/T 35562-2017

National Standard of the People's Republic of China

ICS
07.060
Classification
A 47

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Terms and definitions
  • 3 average temperature calculation method
  • 4 rating, indicators and methods
  • Appendix A (Normative) Climate averages, anomalies and standard deviation calculation method
  • Reference

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the calculation of space-time average based on the average daily temperature and temperature rating, indicators and methods.

This standard applies to temperature-related monitoring, prediction, evaluation and service.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 Temperature

airtemperature The physical quantity that indicates the degree of hot and cold air. [QX/T 50-2007, Definition 3.1]

Note: The unit is Celsius (°C).

2.2 Region

A geographical area, such as administrative areas, watersheds and other geographical sub-area or given range.

2.3 Average temperature

temperaturerage Temperature averages over a period of time or space.

Note: The unit is Celsius (°C).

2.4 Climate normal

Meteorological elements average 30 years or above. [QX/T 152-2012, definition 2.5]

Note: The unit is Celsius (°C).

2.5 Temperature anomaly

The difference between a given temperature and its climatological average (2.4).

Note: The unit is Celsius (°C).

2.6 Standard deviation

The average magnitude of the deviation of each data in the series from its average (2.4).

3 Average temperature calculation method

3.1 Period average temperature

The average temperature of a period (Tp) is calculated by dividing the total daily average temperature in the period by the number of days in that period. See calculation formula Formula 1).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35562-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35562-2017

$145.00