GB/T 35553-2017Energy conservation requirements for electromechanical equipment of urban rail transit (English PDF)
城市轨道交通机电设备节能要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35553-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35553-2017 is the English-translated version of 城市轨道交通机电设备节能要求.
GB/T 35553-2017 is the Chinese standard "Energy conservation requirements for electromechanical equipment of urban rail transit".
Its scope clause reads: This standard specifies the urban rail transit power supply and lighting, communications and signaling, operational display equipment, ventilation, air conditioning and heating, water supply and drainage, since Escalators, travelators and elevators, power equipment, energy-saving requirements of other equipment, and test and test methods.
This standard applies to urban rail transit electrical and mechanical equipment energy efficiency assessment.
Found what you need?
Document preview — GB/T 35553-2017
National Standard of the People's Republic of China
- ICS
- 45.060
- Classification
- S 34
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 code and abbreviations
- 5 power supply and lighting
- 6 Communication and signal
- 7 operating display device
- 8 Ventilation, air conditioning and heating, water supply and drainage
- 10 power equipment
- 12 Test and test methods
1 Scope
This standard specifies the urban rail transit power supply and lighting, communications and signaling, operational display equipment, ventilation, air conditioning and heating, water supply and drainage, since
Escalators, travelators and elevators, power equipment, energy-saving requirements of other equipment, and test and test methods.
This standard applies to urban rail transit electrical and mechanical equipment energy efficiency assessment.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1032 three-phase asynchronous motor test method
GB/T 1094.1 Power Transformers Part 1. General
GB/T 1094.11 Power transformers - Part 11. Dry-type transformers
GB/T 1236 industrial fan with a standardized duct performance test
GB/T 1311 DC motor test methods
GB/T 3216 rotary power pump hydraulic performance acceptance test Level 1, Level 2 and Level 3
GB/T 3853 positive displacement compressor acceptance test
GB/T 7190.1 glass fiber reinforced plastic cooling tower Part 1. Small and medium glass fiber reinforced plastic cooling
GB/T 7260.3 uninterruptible power supply (UPS) Part 3. Determination of performance methods and test requirements
GB/T 10178 industrial fan performance test site
GB/T 10233 low-voltage switchgear and electronic control equipment - Basic test methods
GB/T 10870 vapor compression cycle cold water (heat pump) unit performance test methods
GB/T 16821 communications power supply equipment common test methods
GB 17896-2012 Fluorescent tube ballast energy efficiency limit value and energy efficiency rating
GB/T 18430.1 vapor compression cycle cold water (heat pump) unit - Part 1. Industrial or commercial use and similar purposes of cold water (heat
Pump) unit
GB/T 18430.2 vapor compression cycle cold water (heat pump) unit Part 2 - cold water (heat pump) units for household and similar purposes
GB 18613-2012 small and medium-sized three-phase asynchronous motor efficiency limits and energy efficiency rating
GB 19043-2013 double-ended fluorescent lamps for general lighting energy efficiency limits and energy efficiency rating
GB 19044-2013 Self-ballasted fluorescent lamps for general lighting - Limits of energy efficiency and energy efficiency class
GB 19153-2009 Positive displacement air compressor energy efficiency limits and energy efficiency rating
GB 19415-2013 Single-ended fluorescent energy efficiency limit value and energy-saving rating
GB 19577-2015 Chiller energy efficiency limits and energy efficiency rating
Ventilation efficiency limits and efficiency class GB 19761-2009
GB 19762 Clean Water Centrifugal Pump Energy Efficiency Limits and Energy Conservation Rating
GB/T 19826 power engineering DC power supply equipment, general technical conditions and safety requirements
GB .20052-2013 three phase distribution transformer energy efficiency limit value and energy efficiency rating
GB .20053 metal halide lamp ballast energy efficiency limit value and energy efficiency rating […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35553-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35553-2017
$235.00