GB/T 35326-2017Seed cotton module dispersing feeder (English PDF)

1 Scope

This standard specifies the cotton mold opening feed feeder (hereinafter referred to feeder) product type, technical requirements, test methods, inspection rules and standard

Log, packaging, storage and transportation requirements.

This standard applies to feeder design, manufacture and quality testing.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

GB/T 6075.1 Measurement and evaluation of machine vibration on non-rotating parts - Part 1. General

GB/T 6388 transport packaging shipping symbols

GB/T 9239.1-2006 Mechanical vibration constant (rigid) rotor balance quality requirements - Part 1. Specification and balance of tolerance test

GB 18399 cotton processing machinery safety requirements

3 product model

Category classification code. Agricultural and sideline products processing machinery

Small class classification code. Cotton processing machinery

KM Group code

Feature code. Open mode (G is fixed, I is a one-way mobile,

II for two-way mobile)

- ----

Main parameter code. Working width of open roller (mm)

Improve the code .A, B, C

Note. The letter G can be omitted when the mold opening mode is fixed.

Example.

The working width of opening roller is 2800mm, and after the first improvement, the one-way moving type cotton die opening feeder, the product model is 6MKMI-2800A.

4 technical requirements