Valid

GB/T 35265-2017Characterisation and testing methods of recycled polypropylene (PP) (English PDF)

聚丙烯(PP)塑料回收料的表征特性及检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35265-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35265-2017 is the English-translated version of 聚丙烯(PP)塑料回收料的表征特性及检测方法.

GB/T 35265-2017 is the Chinese standard "Characterisation and testing methods of recycled polypropylene (PP)". Its scope clause reads: This standard specifies the plastic or semi-finished products for the production of polypropylene (PP) plastic recycling of the important characterization of the test method to And quality assurance.

This standard applies to the evaluation of PP plastic recycling materials in the transaction process, the relevant parties can choose the applicable characterization characteristics and the Association according to this standard Determine the delivery conditions.

Note.

Polypropylene plastic wastes or polypropylene blended plastic wastes may contain various forms of propylene polymerization such as monopoly, copolymerization, homopolymerization, regulation and irregularity They may also contain additives such as fillers, flame retardants, etc. The performance of the recovered material from these wastes will depend on the relative amounts of the various ingredients.

Its clauses include terms and definitions; pp recycled materials characterization and detection methods.

Found what you need?

Document preview — GB/T 35265-2017

National Standard of the People's Republic of China

ICS
83.080
Classification
G 31

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 PP recycled materials characterization and detection methods

1 Scope

This standard specifies the plastic or semi-finished products for the production of polypropylene (PP) plastic recycling of the important characterization of the test method to

And quality assurance.

This standard applies to the evaluation of PP plastic recycling materials in the transaction process, the relevant parties can choose the applicable characterization characteristics and the Association according to this standard

Determine the delivery conditions.

Note. Polypropylene plastic wastes or polypropylene blended plastic wastes may contain various forms of propylene polymerization such as monopoly, copolymerization, homopolymerization, regulation and irregularity

They may also contain additives such as fillers, flame retardants, etc. The performance of the recovered material from these wastes will depend on the relative amounts of the various ingredients.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 1033.1-2008 Plastics - Determination of density of non-foamed plastics - Part 1. Immersion method, liquid pyknometer method and titration method

GB/T 1040.1 Plastics - Determination of tensile properties - Part 1. General

GB/T 1040.2 Determination of tensile properties of plastics - Part 2. Test conditions for molding and extrusion of plastics

GB/T 1043.1 Plastics - Determination of Charpy impact properties - Part 1. Non-instrumented impact test

Determination of GB/T 1843 plastic Izod impact strength

GB/T 2035 Plastics Terms and Definitions

GB/T 3682 Thermoplastics melt mass flow rate and melt volume flow rate determination

GB/T 9341 Plastics Determination of bending properties

GB/T 9345.1 Plastics - Determination of ash - Part 1. General methods

Plastics - Vinyl chloride homopolymer and copolymer resins - Determination of particle size by mechanical screening GB/T ISO 179-2 Plastics - Determination of Charpy Impact Behaviors - Part 2. Instrumented Shock Tests (Plastics-Determination ofCharpyimpactproperties-Part 2. Instrumentedimpacttest)

3 Terms and definitions

GB/T 2035 defined and the following terms and definitions apply to this document.

3.1 Recycled material

Used or recycled materials, or both.

4 PP recycled materials characterization and detection methods

4.1

PP recycled material characterization characteristics are divided into basic characterization and reference characterization. The former for the basic evaluation of PP recycled materials, the latter

According to customer requirements and the use of recycled materials by both parties choose to use. Characterization and corresponding detection methods in Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35265-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35265-2017

$145.00