Valid

GB/T 35262-2017Characterisation and testing methods of recycled poly(vinyl chloride)(PVC) (English PDF)

聚氯乙烯(PVC)塑料回收料的表征特性及检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35262-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35262-2017 is the English-translated version of 聚氯乙烯(PVC)塑料回收料的表征特性及检测方法.

GB/T 35262-2017 is the Chinese standard "Characterisation and testing methods of recycled poly(vinyl chloride)(PVC)". Its scope clause reads: This standard specifies the plastic or semi-finished products for the production of polyvinyl chloride (PVC) plastic recycling of the important characterization of the test side Law and quality assurance.

This standard applies to the evaluation of PVC plastic recycling materials in the transaction process, the relevant parties can choose the applicable characterization characteristics and the Association according to this standard Determine the delivery conditions.

Note. PVC plastic recycling materials by the composition of different PVC plastic composition. The composition of a typical PVC plastic see Appendix A.

Found what you need?

Document preview — GB/T 35262-2017

National Standard of the People's Republic of China

ICS
83.080
Classification
G 31

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references

1 Scope

This standard specifies the plastic or semi-finished products for the production of polyvinyl chloride (PVC) plastic recycling of the important characterization of the test side

Law and quality assurance.

This standard applies to the evaluation of PVC plastic recycling materials in the transaction process, the relevant parties can choose the applicable characterization characteristics and the Association according to this standard

Determine the delivery conditions.

Note. PVC plastic recycling materials by the composition of different PVC plastic composition. The composition of a typical PVC plastic see Appendix A.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 1033.1 Determination of plastic non-foam density - Part 1. Immersion method, liquid pyknometer method and titration method

GB/T 1040.1 Plastics - Determination of tensile properties - Part 1. General

GB/T 1040.2 Determination of tensile properties of plastics - Part 2. Test conditions for molding and extrusion of plastics

Thermoplastics Vicat softening temperature (VST) determination

GB/T 2035 Plastics Terms and Definitions

GB/T 2411 Plastics and hard rubbers Determination of indentation hardness (Shore hardness) using a durometer

GB/T 2914 Determination of vinyl chloride homopolymer and copolymer resin volatiles (including water)

GB/T 2917.1 vinyl chloride homopolymer and copolymer-based blends and products released at high temperature hydrogen chloride and any other acidic

Determination of the product Congo red method

GB/T 6005 test sieve wire mesh, perforated plate and the basic dimensions of the electroformed sheet sieve

Determination of GB/T 9345.5 Plastics - Part 5. Polyvinyl chloride

GB/T 21060 Plastics - Determination of fluidity

ISO 182-2 plastic compounds and vinyl chloride copolymer, homopolymer in the high temperature decomposition of hydrogen chloride and other acidic trend

Set Part 2.pH value method (Plastics-Determinationofthetendencyofcompoundsandproductsbasedon vinylchloride homopolymers and copolymersmerstoevolvehydrogenchloride and anotheracidic productsatelevatedtemperatures-Part 2.pHmethod)

ISO 182-3 Plastics based on the tendency of vinyl chloride homopolymers and copolymers to release hydrogen chloride and other acidic products upon warming

Determination of Part 3. Conductance measurement method (Plastics-Determinationofthetendencyofcompoundsandproducts based on vinylchloride homopolymers and copolymers acidicproductsatelevatedtemperatures-Part 3.Conductometricmethod)

ISO 182-4 Plastics Based on the tendency of vinyl chloride homopolymers and copolymers to release hydrogen chloride and other acidic products upon warming

Assay Part 4. Potentiometry (Plastics-Determination of the potential of compounds and products based on vinylchloride homopolymers and copolymers acidicproductsatelevatedtemperatures-Part 4.Potentiometricmethod) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35262-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35262-2017

$295.00